Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option

From: Mauro Carvalho Chehab
Date: Thu May 14 2015 - 17:57:34 EST


Em Wed, 22 Apr 2015 16:04:10 -0700
Arun Ramamurthy <arun.ramamurthy@xxxxxxxxxxxx> escreveu:

> Most of the phy providers use "select" to enable GENERIC_PHY. Since select
> is only recommended when the config is not visible, GENERIC_PHY is changed
> an invisible option. To maintain consistency, all phy providers are changed
> to "select" GENERIC_PHY and all non-phy drivers use "depends on" when the
> phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic
> dependency, so it is left as "select".
>
> Signed-off-by: Arun Ramamurthy <arun.ramamurthy@xxxxxxxxxxxx>
> ---
> drivers/ata/Kconfig | 1 -

> drivers/media/platform/exynos4-is/Kconfig | 2 +-
For media part:
Acked-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>

> drivers/phy/Kconfig | 4 ++--
> drivers/usb/host/Kconfig | 4 ++--
> drivers/video/fbdev/exynos/Kconfig | 2 +-
> 5 files changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 5f60155..6d2e881 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -301,7 +301,6 @@ config SATA_MV
> tristate "Marvell SATA support"
> depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
> ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
> - select GENERIC_PHY
> help
> This option enables support for the Marvell Serial ATA family.
> Currently supports 88SX[56]0[48][01] PCI(-X) chips,
> diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
> index b7b2e47..b6f3eaa 100644
> --- a/drivers/media/platform/exynos4-is/Kconfig
> +++ b/drivers/media/platform/exynos4-is/Kconfig
> @@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC
> config VIDEO_S5P_MIPI_CSIS
> tristate "S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver"
> depends on REGULATOR
> - select GENERIC_PHY
> + depends on GENERIC_PHY
> help
> This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2
> receiver (MIPI-CSIS) devices.
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 2962de2..edecdb1 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -5,7 +5,7 @@
> menu "PHY Subsystem"
>
> config GENERIC_PHY
> - bool "PHY Core"
> + bool
> help
> Generic PHY support.
>
> @@ -72,7 +72,7 @@ config PHY_MIPHY365X
> config PHY_RCAR_GEN2
> tristate "Renesas R-Car generation 2 USB PHY driver"
> depends on ARCH_SHMOBILE
> - depends on GENERIC_PHY
> + select GENERIC_PHY
> help
> Support for USB PHY found on Renesas R-Car generation 2 SoCs.
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 5ad60e4..e2197e2 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR
> config USB_EHCI_HCD_STI
> tristate "Support for ST STiHxxx on-chip EHCI USB controller"
> depends on ARCH_STI && OF
> - select GENERIC_PHY
> + depends on GENERIC_PHY
> select USB_EHCI_HCD_PLATFORM
> help
> Enable support for the on-chip EHCI controller found on
> @@ -409,7 +409,7 @@ config USB_OHCI_HCD_SPEAR
> config USB_OHCI_HCD_STI
> tristate "Support for ST STiHxxx on-chip OHCI USB controller"
> depends on ARCH_STI && OF
> - select GENERIC_PHY
> + depends on GENERIC_PHY
> select USB_OHCI_HCD_PLATFORM
> help
> Enable support for the on-chip OHCI controller found on
> diff --git a/drivers/video/fbdev/exynos/Kconfig b/drivers/video/fbdev/exynos/Kconfig
> index 1f16b46..6c53894 100644
> --- a/drivers/video/fbdev/exynos/Kconfig
> +++ b/drivers/video/fbdev/exynos/Kconfig
> @@ -16,7 +16,7 @@ if EXYNOS_VIDEO
>
> config EXYNOS_MIPI_DSI
> bool "EXYNOS MIPI DSI driver support."
> - select GENERIC_PHY
> + depends on GENERIC_PHY
> help
> This enables support for MIPI-DSI device.
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/