Re: [PATCH v1 10/13] ASoC: qcom: Add apq8016 lpass driver support
From: Kenneth Westfield
Date: Fri May 15 2015 - 01:23:54 EST
On Wed, May 13, 2015 at 05:03:06AM -0700, Srinivas Kandagatla wrote:
> This patch adds apq8016 lpass driver support. APQ8016 has 4 MI2S which
> can be routed to one internal codec and 2 external codec interfaces.
>
> Primary, Secondary, Quaternary I2S can do Rx(playback) and Tertiary and
> Quaternary can do Tx(capture).
> diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
> index 865205e..9cc5ed7 100644
> --- a/sound/soc/qcom/Kconfig
> +++ b/sound/soc/qcom/Kconfig
> @@ -20,6 +20,12 @@ config SND_SOC_LPASS_IPQ806X
> select SND_SOC_LPASS_CPU
> select SND_SOC_LPASS_PLATFORM
>
> +config SND_SOC_LPASS_APQ8016
> + tristate
> + depends on SND_SOC_QCOM
> + select SND_SOC_LPASS_CPU
> + select SND_SOC_LPASS_PLATFORM
Continuing from my comments on patch 2/13, should an OF dependency be added
here as well?
> +
> config SND_SOC_STORM
> tristate "ASoC I2S support for Storm boards"
> depends on (ARCH_QCOM && SND_SOC_QCOM) || COMPILE_TEST
> diff --git a/sound/soc/qcom/lpass-apq8016.c
> b/sound/soc/qcom/lpass-apq8016.c
> new file mode 100644
> index 0000000..5cbf17f0
> --- /dev/null
> +++ b/sound/soc/qcom/lpass-apq8016.c
> +static int apq8016_lpass_free_dma_channel(struct lpass_data *drvdata, int
> chan)
> +{
> + clear_bit(chan, &drvdata->rdma_ch_bit_map);
> +
> + return 0;
> +}
> +
> +static int apq8016_lpass_init(struct platform_device *pdev)
> +{
> + struct lpass_data *drvdata = platform_get_drvdata(pdev);
> + struct device *dev = &pdev->dev;
> + int ret;
> +
> + drvdata->pcnoc_mport_clk = devm_clk_get(dev, "pcnoc-mport-clk");
> + if (IS_ERR(drvdata->pcnoc_mport_clk)) {
> + dev_err(&pdev->dev, "%s() error getting pcnoc-mport-clk:
> %ld\n",
> + __func__,
> PTR_ERR(drvdata->pcnoc_mport_clk));
> + return PTR_ERR(drvdata->pcnoc_mport_clk);
> + }
> +
> + ret = clk_prepare_enable(drvdata->pcnoc_mport_clk);
> + if (ret) {
> + dev_err(&pdev->dev, "%s() Error enabling ahbix_clk: %d\n",
Please correct the clock name in the log message ...
> + __func__, ret);
> + return ret;
> + }
> +
> + drvdata->pcnoc_sway_clk = devm_clk_get(dev, "pcnoc-sway-clk");
> + if (IS_ERR(drvdata->pcnoc_sway_clk)) {
> + dev_err(&pdev->dev, "%s() error getting pcnoc-sway-clk:
> %ld\n",
> + __func__,
> PTR_ERR(drvdata->pcnoc_sway_clk));
> + return PTR_ERR(drvdata->pcnoc_sway_clk);
> + }
> +
> + ret = clk_prepare_enable(drvdata->pcnoc_sway_clk);
> + if (ret) {
> + dev_err(&pdev->dev, "%s() Error enabling ahbix_clk: %d\n",
... here too.
> + __func__, ret);
> + return ret;
> + }
--
Kenneth Westfield
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/