[tip:x86/apic] x86: Pack loops tightly as well

[tip-bot for Ingo Molnar]

Commit-ID:  52648e83c9a6b9f7fc3dd272d4d10175e93aa62a
Gitweb:     http://git.kernel.org/tip/52648e83c9a6b9f7fc3dd272d4d10175e93aa62a
Author:     Ingo Molnar <mingo@xxxxxxxxxx>
AuthorDate: Sun, 17 May 2015 07:56:54 +0200
Committer:  Ingo Molnar <mingo@xxxxxxxxxx>
CommitDate: Sun, 17 May 2015 07:56:54 +0200

x86: Pack loops tightly as well

Packing loops tightly (-falign-loops=1) is beneficial to code size:

     text        data    bss     dec              filename
 12566391        1617840 1089536 15273767         vmlinux.align.16-byte
 12224951        1617840 1089536 14932327         vmlinux.align.1-byte
 11976567        1617840 1089536 14683943         vmlinux.align.1-byte.funcs-1-byte
 11903735        1617840 1089536 14611111         vmlinux.align.1-byte.funcs-1-byte.loops-1-byte

Which reduces the size of the kernel by another 0.6%, so the
the total combined size reduction of the alignment-packing
patches is ~5.5%.

The x86 decoder bandwidth and caching arguments laid out in:

  be6cb02779ca ("x86: Align jump targets to 1-byte boundaries")

apply to loop alignment as well.

Furtermore, modern CPU uarchs have a loop cache/buffer that
is a L0 cache before even any uop cache, covering a few
dozen most recently executed instructions.

This loop cache generally does not have the 16-byte alignment
restrictions of the uop cache.

Now loop alignment can still be beneficial if:

 - a loop is cache-hot and its surroundings are not.

 - if the loop is so cache hot that the instruction
   flow becomes x86 decoder bandwidth limited

But loop alignment is harmful if:

 - a loop is cache-cold

 - a loop's surroundings are cache-hot as well

 - two cache-hot loops are close to each other

 - if the loop fits into the loop cache

 - if the code flow is not decoder bandwidth limited

and I'd argue that the latter five scenarios are much
more common in the kernel, as our hottest loops are
typically:

 - pointer chasing: this should fit into the loop cache
   in most cases and is typically data cache and address
   generation limited

 - generic memory ops (memset, memcpy, etc.): these generally
   fit into the loop cache as well, and are likewise data
   cache limited.

So this patch packs loop addresses tightly as well.

Acked-by: Denys Vlasenko <dvlasenk@xxxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
Cc: Aswin Chandramouleeswaran <aswin@xxxxxx>
Cc: Borislav Petkov <bp@xxxxxxxxx>
Cc: Brian Gerst <brgerst@xxxxxxxxx>
Cc: Davidlohr Bueso <dave@xxxxxxxxxxxx>
Cc: H. Peter Anvin <hpa@xxxxxxxxx>
Cc: Jason Low <jason.low2@xxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Cc: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
Cc: Peter Zijlstra <a.p.zijlstra@xxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Tim Chen <tim.c.chen@xxxxxxxxxxxxxxx>
Link: http://lkml.kernel.org/r/20150410123017.GB19918@xxxxxxxxx
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
---
 arch/x86/Makefile | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index ca17e5f..57996ee 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -80,6 +80,9 @@ else
         # Align jump targets to 1 byte, not the default 16 bytes:
         KBUILD_CFLAGS += -falign-jumps=1
 
+        # Pack loops tightly as well:
+        KBUILD_CFLAGS += -falign-loops=1
+
         # Don't autogenerate traditional x87 instructions
         KBUILD_CFLAGS += $(call cc-option,-mno-80387)
         KBUILD_CFLAGS += $(call cc-option,-mno-fp-ret-in-387)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/