[PATCH 6/7] ARM: bcm2835: Use the RPi firmware clocks for uart.

[Eric Anholt]

This gets us a correct apb_pclk, which previously was accidentally
using the "20201000.uart" clock from clk-bcm2835.c, due to the
fallback clk_get_sys() path.

Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
---
 arch/arm/boot/dts/bcm2835-rpi.dtsi | 7 +++++++
 arch/arm/boot/dts/bcm2835.dtsi     | 2 +-
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index ac5f84c..53285a3 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -1,3 +1,4 @@
+#include <dt-bindings/clk/raspberrypi.h>
 #include "bcm2835.dtsi"
 
 / {
@@ -62,3 +63,9 @@
 	status = "okay";
 	bus-width = <4>;
 };
+
+&uart0 {
+	clocks = <&firmware_clocks RPI_CLOCK_UART0>,
+		 <&firmware_clocks RPI_CLOCK_CORE>;
+	clock-names = "uartclk", "apb_pclk";
+};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 32f5830..5be2862 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -92,7 +92,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		uart@7e201000 {
+		uart0: uart@7e201000 {
 			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
 			reg = <0x7e201000 0x1000>;
 			interrupts = <2 25>;
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/