[PATCH v2 0/5] Add iProc MDIO and Cygnus PCIe PHY support

[Ray Jui]

This patch series adds support for the Cygnus PCIe PHY and support of the
MDC/MDIO bus interface found in various iProc based of SoCs. The iProc
MDC/MDIO bus interface can be used by the host processor to communicate with
various internal Serdes/PHYs including Ethernet, PCIe, USB, etc.

This patch series is based on Linux v4.1-rc4 and is avaliable in:
https://github.com/Broadcom/cygnus-linux/tree/cygnus-pcie-phy-v2

Changes from v1:
 - Move the MDC/MDIO bus driver from drivers/phy/* to drivers/bus/*
 - Make the PCIe PHY device node child node of the MDIO bus
 - Change the PCIe PHY driver to tristate so it can be compiled as a module
 - Other minor changes

Ray Jui (5):
  dt_bindings: Add iProc MDC/MDIO interface binding
  phy: iproc-mdio: Initial iProc MDC/MDIO support
  phy: cygnus: pcie: Define DT binding
  phy: cygnus: pcie: Add Cygnus PCIe PHY support
  ARM: dts: enable PCIe PHY support for Cygnus

 .../devicetree/bindings/bus/brcm,iproc-mdio.txt    |   21 ++
 .../bindings/phy/brcm,cygnus-pcie-phy.txt          |   34 ++
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |   20 ++
 drivers/bus/Kconfig                                |   12 +
 drivers/bus/Makefile                               |    1 +
 drivers/bus/iproc-mdio-bus.c                       |  255 +++++++++++++++
 drivers/phy/Kconfig                                |   15 +
 drivers/phy/Makefile                               |    1 +
 drivers/phy/phy-cygnus-pcie.c                      |  340 ++++++++++++++++++++
 include/linux/iproc_mdio_bus.h                     |   22 ++
 10 files changed, 721 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/bus/brcm,iproc-mdio.txt
 create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
 create mode 100644 drivers/bus/iproc-mdio-bus.c
 create mode 100644 drivers/phy/phy-cygnus-pcie.c
 create mode 100644 include/linux/iproc_mdio_bus.h

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/