Re: [PATCH v2] spmi-pmic-arb: add irq tracepoints to the pmic-arb driver

[Steven Rostedt]

On Wed, 27 May 2015 10:21:10 -0600
"Ankit Gupta" <ankgupta@xxxxxxxxxxxxxx> wrote:

> > The spmi-pmic-arb is also an interrupt controller. It gets a
> > single aggregate irq and disseminates it to individual
> > pmic-peripheral drivers. Each pmic-peripheral has a unique apid
> > number, and can have multiple interrupt capable functions.
> > The registered apid range shows the lowest and highest apid
> > numbers of pmic-peripheral drivers which request irqs. Pid is
> > the base address of that peripheral. For performance measurement,
> > tracepoints are added at the beginning of the aggregate irq and
> > at the end of the individual pmic-peripheral irqs.
> >
> > Following is a list showing the new tracepoint events:
> >
> > spmi_pmic_arb_aggregate_irq_start: aggregate irq number and registered
> > 				   apid range.
> >
> > spmi_pmic_arb_apid_irq_end: apid, irq, func_num, sid and pid.
> >
> > SPMI Interrupts tracepoints can be enabled like:
> >
> > echo 1 >/sys/kernel/debug/tracing/events/spmi-pmic-arb/enable
> >
> > and will dump messages that can be viewed in
> > /sys/kernel/debug/tracing/trace that look like:
> > ... spmi_pmic_arb_aggregate_irq_start: irq=150 registered apid
> > range=(3,189)
> > ... spmi_pmic_arb_apid_irq_end: apid=3 irq=1 func_num=0 sid=0 pid=0x8
> >
> > Suggested-by: Sagar Dharia <sdharia@xxxxxxxxxxxxxx>
> > Signed-off-by: Gilad Avidov <gavidov@xxxxxxxxxxxxxx>
> > Signed-off-by: Ankit Gupta <ankgupta@xxxxxxxxxxxxxx>
> > ---
> 
> ---
> Changes since V1:
> - pass ppid from driver to evaluate pid and sid in trace file itself.
> - type of apid range change from int to u16 as max range can be 512.
> - type of func_num change from int to u8, as max it can be 8.
> ---
> 

Tracing part looks fine to me.

Acked-by: Steven Rostedt <rostedt@xxxxxxxxxxx>

-- Steve
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/