[PATCH v3 4/6] dt-bindings: Consolidate ChipIdea USB ci13xxx bindings
From: Rob Herring
Date: Fri May 29 2015 - 12:39:19 EST
Combine the ChipIdea USB binding into a single document to reduce
duplication and fragmentation. This marks use of the old PHY bindings as
deprecated. Future compatible bindings should use generic PHY binding.
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
Cc: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
Cc: Peter Chen <peter.chen@xxxxxxxxxxxxx>
Cc: Daniel Tang <dt.tangr@xxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
---
.../devicetree/bindings/usb/ci-hdrc-imx.txt | 35 ----------------------
.../devicetree/bindings/usb/ci-hdrc-qcom.txt | 17 -----------
.../devicetree/bindings/usb/ci-hdrc-usb2.txt | 22 +++++++++++++-
.../devicetree/bindings/usb/ci-hdrc-zevio.txt | 17 -----------
4 files changed, 21 insertions(+), 70 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt
delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
deleted file mode 100644
index 38a5480..0000000
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* Freescale i.MX ci13xxx usb controllers
-
-Required properties:
-- compatible: Should be "fsl,imx27-usb"
-- reg: Should contain registers location and length
-- interrupts: Should contain controller interrupt
-- fsl,usbphy: phandle of usb phy that connects to the port
-
-Recommended properies:
-- phy_type: the type of the phy connected to the core. Should be one
- of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
- property the PORTSC register won't be touched
-- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
-
-Optional properties:
-- fsl,usbmisc: phandler of non-core register device, with one argument
- that indicate usb controller index
-- vbus-supply: regulator for vbus
-- disable-over-current: disable over current detect
-- external-vbus-divider: enables off-chip resistor divider for Vbus
-- maximum-speed: limit the maximum connection speed to "full-speed".
-- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts
-
-Examples:
-usb@02184000 { /* USB OTG */
- compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
- reg = <0x02184000 0x200>;
- interrupts = <0 43 0x04>;
- fsl,usbphy = <&usbphy1>;
- fsl,usbmisc = <&usbmisc 0>;
- disable-over-current;
- external-vbus-divider;
- maximum-speed = "full-speed";
- tpl-support;
-};
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt
deleted file mode 100644
index f2899b5..0000000
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Qualcomm CI13xxx (Chipidea) USB controllers
-
-Required properties:
-- compatible: should contain "qcom,ci-hdrc"
-- reg: offset and length of the register set in the memory map
-- interrupts: interrupt-specifier for the controller interrupt.
-- usb-phy: phandle for the PHY device
-- dr_mode: Should be "peripheral"
-
-Examples:
- gadget@f9a55000 {
- compatible = "qcom,ci-hdrc";
- reg = <0xf9a55000 0x400>;
- dr_mode = "peripheral";
- interrupts = <0 134 0>;
- usb-phy = <&usbphy0>;
- };
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index 27f8b1e..553e2fa 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -1,15 +1,35 @@
* USB2 ChipIdea USB controller for ci13xxx
Required properties:
-- compatible: should be "chipidea,usb2"
+- compatible: should be one of:
+ "fsl,imx27-usb"
+ "lsi,zevio-usb"
+ "qcom,ci-hdrc"
+ "chipidea,usb2"
- reg: base address and length of the registers
- interrupts: interrupt for the USB controller
+Recommended properies:
+- phy_type: the type of the phy connected to the core. Should be one
+ of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
+ property the PORTSC register won't be touched.
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
+
+Deprecated properties:
+- usb-phy: phandle for the PHY device. Use "phys" instead.
+- fsl,usbphy: phandle of usb phy that connects to the port. Use "phys" instead.
+
Optional properties:
- clocks: reference to the USB clock
- phys: reference to the USB PHY
- phy-names: should be "usb-phy"
- vbus-supply: reference to the VBUS regulator
+- maximum-speed: limit the maximum connection speed to "full-speed".
+- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts
+- fsl,usbmisc: (FSL only) phandler of non-core register device, with one
+ argument that indicate usb controller index
+- disable-over-current: (FSL only) disable over current detect
+- external-vbus-divider: (FSL only) enables off-chip resistor divider for Vbus
Example:
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
deleted file mode 100644
index abbcb2a..0000000
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* LSI Zevio USB OTG Controller
-
-Required properties:
-- compatible: Should be "lsi,zevio-usb"
-- reg: Should contain registers location and length
-- interrupts: Should contain controller interrupt
-
-Optional properties:
-- vbus-supply: regulator for vbus
-
-Examples:
- usb0: usb@b0000000 {
- reg = <0xb0000000 0x1000>;
- compatible = "lsi,zevio-usb";
- interrupts = <8>;
- vbus-supply = <&vbus_reg>;
- };
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/