Re: [PATCH 16/16] ARM: at91/dt: Add Acme Arietta G25

[Sergio Tanzilli]

Great Alex

thanks

Sergio

On 29 May 2015 at 19:47, Alexandre Belloni
<alexandre.belloni@xxxxxxxxxxxxxxxxxx> wrote:
> Add a minimum Device Tree for Acme Arietta G25.
> http://acme.systems/arietta
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
> Cc: Sergio Tanzilli <tanzilli@xxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/Makefile              |  1 +
>  arch/arm/boot/dts/at91-acme-arietta.dts | 75 +++++++++++++++++++++++++++++++++
>  2 files changed, 76 insertions(+)
>  create mode 100644 arch/arm/boot/dts/at91-acme-arietta.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 8c3da289a00b..96a169e6ea56 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -31,6 +31,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
>         at91sam9n12ek.dtb \
>         at91sam9rlek.dtb \
>         at91-ariag25.dtb \
> +       at91-acme-arietta.dtb \
>         at91-cosino_mega2560.dtb \
>         at91-kizboxmini.dtb \
>         at91sam9g15ek.dtb \
> diff --git a/arch/arm/boot/dts/at91-acme-arietta.dts b/arch/arm/boot/dts/at91-acme-arietta.dts
> new file mode 100644
> index 000000000000..142d588ad6bf
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91-acme-arietta.dts
> @@ -0,0 +1,75 @@
> +/*
> + * Device Tree file for Arietta G25
> + * This device tree is minimal, to activate more peripherals, see:
> + * http://dts.acmesystems.it/arietta/
> + */
> +/dts-v1/;
> +#include "at91sam9g25.dtsi"
> +/ {
> +       model = "Acme Systems Arietta G25";
> +       compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
> +
> +       chosen {
> +               stdout-path = "serial0:115200n8";
> +       };
> +
> +       memory {
> +               reg = <0x20000000 0x8000000>;
> +       };
> +
> +       clocks {
> +               slow_xtal {
> +                       clock-frequency = <32768>;
> +               };
> +
> +               main_xtal {
> +                       clock-frequency = <12000000>;
> +               };
> +       };
> +
> +       ahb {
> +               apb {
> +                       mmc0: mmc@f0008000 {
> +                               pinctrl-0 = <
> +                                 &pinctrl_mmc0_slot0_clk_cmd_dat0
> +                                 &pinctrl_mmc0_slot0_dat1_3>;
> +                               status = "okay";
> +
> +                               slot@0 {
> +                                       reg = <0>;
> +                                       bus-width = <4>;
> +                               };
> +                       };
> +
> +                       usb2: gadget@f803c000 {
> +                               status = "okay";
> +                       };
> +
> +                       dbgu: serial@fffff200 {
> +                               status = "okay";
> +                       };
> +
> +                       rtc@fffffeb0 {
> +                               status = "okay";
> +                       };
> +               };
> +
> +               usb0: ohci@00600000 {
> +                       status = "okay";
> +                       num-ports = <3>;
> +               };
> +
> +               usb1: ehci@00700000 {
> +                       status = "okay";
> +               };
> +       };
> +
> +       leds {
> +               compatible = "gpio-leds";
> +               arietta_led {
> +                       label = "arietta_led";
> +                       gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
> +                       linux,default-trigger = "heartbeat";
> +               };
> +       };
> +};
> --
> 2.1.4
>



-- 
Sergio Tanzilli
tanzilli@xxxxxxxxxxxxxx
Acme Systems srl
http://www.acmesystems.it
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/