[PATCH v2 2/2] mmc: sdhci-bcm2835: Actually enable the clock

[Eric Anholt]

We're currently using a fixed frequency clock specified in the DT, so
enabling is a no-op.  However, the RPi firmware-based clocks driver
can actually disable unused clocks, so when switching to use it we
ended up losing our MMC clock once all devices were probed.

Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
---

v2: Re-disable our clock on sdhci_add_host() failure.

 drivers/mmc/host/sdhci-bcm2835.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-bcm2835.c b/drivers/mmc/host/sdhci-bcm2835.c
index 32f4046..1c65d46 100644
--- a/drivers/mmc/host/sdhci-bcm2835.c
+++ b/drivers/mmc/host/sdhci-bcm2835.c
@@ -172,12 +172,19 @@ static int bcm2835_sdhci_probe(struct platform_device *pdev)
 		ret = PTR_ERR(pltfm_host->clk);
 		goto err;
 	}
+	ret = clk_prepare_enable(pltfm_host->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable host clk\n");
+		goto err;
+	}
 
 	ret = sdhci_add_host(host);
 	if (ret)
-		goto err;
+		goto err_clk;
 
 	return 0;
+err_clk:
+	clk_disable_unprepare(pltfm_host->clk);
 err:
 	sdhci_pltfm_free(pdev);
 	return ret;
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/