The DDR controller of the ARxxx and AR9xxx families provides an
interface to flush the FIFO between various devices and the DDR.
This is mainly used by the IRQ controller to flush the FIFO before
running the interrupt handler of such devices.
Signed-off-by: Alban Bedel <albeu@xxxxxxx>
---
v2: * Fix the node names to respect ePAPR
v3: * Fix some typos
* Really fix the node names this time
---
.../memory-controllers/ath79-ddr-controller.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
diff --git a/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt b/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
new file mode 100644
index 0000000..efe35a06
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
@@ -0,0 +1,35 @@
+Binding for Qualcomm Atheros AR7xxx/AR9xxx DDR controller
+
+The DDR controller of the ARxxx and AR9xxx families provides an interface
+to flush the FIFO between various devices and the DDR. This is mainly used
+by the IRQ controller to flush the FIFO before running the interrupt handler
+of such devices.
+
+Required properties:
+
+- compatible: has to be "qca,<soc-type>-ddr-controller",
+ "qca,[ar7100|ar7240]-ddr-controller" as fallback.
+ On SoC with PCI support "qca,ar7100-ddr-controller" should be used as
+ fallback, otherwise "qca,ar7240-ddr-controller" should be used.
+- reg: Base address and size of the controllers memory area
+- #qca,ddr-wb-channel-cells: has to be 1, the index of the write buffer
+ channel