[RFC 5/9] net: dsa: mv88e6352: disable mirroring

[Vivien Didelot]

Disable the mirroring policy in the monitor control register, since this
feature is not needed.

Signed-off-by: Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/net/dsa/mv88e6352.c | 10 +++-------
 drivers/net/dsa/mv88e6xxx.h |  1 +
 2 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
index 838494a..f541362 100644
--- a/drivers/net/dsa/mv88e6352.c
+++ b/drivers/net/dsa/mv88e6352.c
@@ -63,13 +63,9 @@ static int mv88e6352_setup_global(struct dsa_switch *ds)
 	REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL,
 		  GLOBAL_CONTROL_PPU_ENABLE | GLOBAL_CONTROL_DISCARD_EXCESS);
 
-	/* Configure the upstream port, and configure the upstream
-	 * port as the port to which ingress and egress monitor frames
-	 * are to be sent.
-	 */
-	reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
-		upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
-		upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT;
+	/* Configure the upstream port, and disable policy mirroring. */
+	reg = upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT |
+		GLOBAL_MONITOR_CONTROL_MIRROR_DISABLED;
 	REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
 
 	/* Disable remote management for now, and set the switch's
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index 42032c3..f4ea66a 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -237,6 +237,7 @@
 #define GLOBAL_MONITOR_CONTROL_ARP_SHIFT	4
 #define GLOBAL_MONITOR_CONTROL_MIRROR_SHIFT	0
 #define GLOBAL_MONITOR_CONTROL_ARP_DISABLED	(0xf0)
+#define GLOBAL_MONITOR_CONTROL_MIRROR_DISABLED	0x0f
 #define GLOBAL_CONTROL_2	0x1c
 #define GLOBAL_CONTROL_2_NO_CASCADE		0xe000
 #define GLOBAL_CONTROL_2_MULTIPLE_CASCADE	0xf000
-- 
2.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/