This commit changes the 802.1Q mode of each port from Disabled to
Secure. This enables the VLAN support, by checking the VTU entries on
ingress.
Signed-off-by: Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx>
---
drivers/net/dsa/mv88e6xxx.c | 14 +++++++-------
drivers/net/dsa/mv88e6xxx.h | 5 +++++
2 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index ed49bd8..35243d8 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -1723,13 +1723,11 @@ static int mv88e6xxx_setup_port(struct dsa_switch *ds, int port)
goto abort;
}
- /* Port Control 2: don't force a good FCS, set the maximum
- * frame size to 10240 bytes, don't let the switch add or
- * strip 802.1q tags, don't discard tagged or untagged frames
- * on this port, do a destination address lookup on all
- * received packets as usual, disable ARP mirroring and don't
- * send a copy of all transmitted/received frames on this port
- * to the CPU.
+ /* Port Control 2: don't force a good FCS, set the maximum frame size to
+ * 10240 bytes, enable secure 802.1q tags, don't discard tagged or
+ * untagged frames on this port, do a destination address lookup on all
+ * received packets as usual, disable ARP mirroring and don't send a
+ * copy of all transmitted/received frames on this port to the CPU.
*/
reg = 0;
if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
@@ -1751,6 +1749,8 @@ static int mv88e6xxx_setup_port(struct dsa_switch *ds, int port)
reg |= PORT_CONTROL_2_FORWARD_UNKNOWN;
}
+ reg |= PORT_CONTROL_2_8021Q_SECURE;
+