[PATCH 0/2] change "client->irq >= 0" to "client->irq > 0"

[Octavian Purdila]

This fixes an issue introduces by commit dab472eb931b ("i2c / ACPI:
Use 0 to indicate that device does not have interrupt assigned") where
drivers will try to request IRQ 0 when no GpioInt is defined in ACPI.

The same issue occurs when the device is instantiated via device tree
with no IRQ, or from the i2c sysfs interface, even before the patch
above.

Linus, since the commit above was already merged in the GPIO tree,
should these fixes be merged also via the GPIO tree (with ACKs from
the others subsystem maintainers)?

Octavian Purdila (2):
  iio: change "client->irq >= 0" to "client->irq > 0"
  rtc: change "client->irq >= 0" to "client->irq > 0"

 drivers/iio/accel/bmc150-accel.c | 2 +-
 drivers/iio/accel/kxcjk-1013.c   | 2 +-
 drivers/iio/accel/mma9553.c      | 2 +-
 drivers/iio/imu/kmx61.c          | 8 ++++----
 drivers/rtc/rtc-ds1374.c         | 4 ++--
 drivers/rtc/rtc-ds3232.c         | 2 +-
 6 files changed, 10 insertions(+), 10 deletions(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/