[PATCH kernel v12 26/34] powerpc/powernv/ioda2: Introduce pnv_pci_ioda2_set_window

From: Alexey Kardashevskiy
Date: Fri Jun 05 2015 - 02:43:21 EST


This is a part of moving DMA window programming to an iommu_ops
callback. pnv_pci_ioda2_set_window() takes an iommu_table_group as
a first parameter (not pnv_ioda_pe) as it is going to be used as
a callback for VFIO DDW code.

This should cause no behavioural change.

Signed-off-by: Alexey Kardashevskiy <aik@xxxxxxxxx>
Reviewed-by: David Gibson <david@xxxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
---
Changes:
v12:
* removed comment from commit log about pnv_pci_ioda2_tvt_invalidate()/
pnv_pci_ioda2_invalidate_entire()

v11:
* replaced some 1<<it_page_shift with IOMMU_PAGE_SIZE() macro

v9:
* initialize pe->table_group.tables[0] at the very end when
tbl is fully initialized
* moved pnv_pci_ioda2_tvt_invalidate() from earlier patch
---
arch/powerpc/platforms/powernv/pci-ioda.c | 47 +++++++++++++++++++++++++------
1 file changed, 38 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 38d53dc..da14043 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1969,6 +1969,43 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
}
}

+static long pnv_pci_ioda2_set_window(struct iommu_table_group *table_group,
+ int num, struct iommu_table *tbl)
+{
+ struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe,
+ table_group);
+ struct pnv_phb *phb = pe->phb;
+ int64_t rc;
+ const __u64 start_addr = tbl->it_offset << tbl->it_page_shift;
+ const __u64 win_size = tbl->it_size << tbl->it_page_shift;
+
+ pe_info(pe, "Setting up window %llx..%llx pg=%x\n",
+ start_addr, start_addr + win_size - 1,
+ IOMMU_PAGE_SIZE(tbl));
+
+ /*
+ * Map TCE table through TVT. The TVE index is the PE number
+ * shifted by 1 bit for 32-bits DMA space.
+ */
+ rc = opal_pci_map_pe_dma_window(phb->opal_id,
+ pe->pe_number,
+ pe->pe_number << 1,
+ 1,
+ __pa(tbl->it_base),
+ tbl->it_size << 3,
+ IOMMU_PAGE_SIZE(tbl));
+ if (rc) {
+ pe_err(pe, "Failed to configure TCE table, err %ld\n", rc);
+ return rc;
+ }
+
+ pnv_pci_link_table_and_group(phb->hose->node, num,
+ tbl, &pe->table_group);
+ pnv_pci_ioda2_tce_invalidate_entire(pe);
+
+ return 0;
+}
+
static void pnv_pci_ioda2_set_bypass(struct pnv_ioda_pe *pe, bool enable)
{
uint16_t window_id = (pe->pe_number << 1 ) + 1;
@@ -2124,21 +2161,13 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
pe->table_group.ops = &pnv_pci_ioda2_ops;
#endif

- /*
- * Map TCE table through TVT. The TVE index is the PE number
- * shifted by 1 bit for 32-bits DMA space.
- */
- rc = opal_pci_map_pe_dma_window(phb->opal_id, pe->pe_number,
- pe->pe_number << 1, 1, __pa(tbl->it_base),
- tbl->it_size << 3, 1ULL << tbl->it_page_shift);
+ rc = pnv_pci_ioda2_set_window(&pe->table_group, 0, tbl);
if (rc) {
pe_err(pe, "Failed to configure 32-bit TCE table,"
" err %ld\n", rc);
goto fail;
}

- pnv_pci_ioda2_tce_invalidate_entire(pe);
-
/* OPAL variant of PHB3 invalidated TCEs */
if (phb->ioda.tce_inval_reg)
tbl->it_type |= (TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE);
--
2.4.0.rc3.8.gfb3e7d5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/