RE: [PATCH 6/9] input: goodix: write configuration data to device

[Tirdea, Irina]

> -----Original Message-----
> From: Dmitry Torokhov [mailto:dmitry.torokhov@xxxxxxxxx]
> Sent: 05 June, 2015 19:43
> To: Tirdea, Irina
> Cc: Bastien Nocera; Mark Rutland; linux-input@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Purdila,
> Octavian
> Subject: Re: [PATCH 6/9] input: goodix: write configuration data to device
> 
> On Fri, Jun 05, 2015 at 04:36:24PM +0000, Tirdea, Irina wrote:
> >
> >
> > > -----Original Message-----
> > > From: Bastien Nocera [mailto:hadess@xxxxxxxxxx]
> > > Sent: 04 June, 2015 15:55
> > > To: Tirdea, Irina
> > > Cc: Mark Rutland; Dmitry Torokhov; linux-input@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> Purdila,
> > > Octavian
> > > Subject: Re: [PATCH 6/9] input: goodix: write configuration data to device
> > >
> > > On Thu, 2015-05-28 at 13:51 +0000, Tirdea, Irina wrote:
> > > >
> > > > > -----Original Message-----
> > > > > From: Mark Rutland [mailto:mark.rutland@xxxxxxx]
> > > > > Sent: 28 May, 2015 16:22
> > > > > To: Tirdea, Irina
> > > > > Cc: Dmitry Torokhov; Bastien Nocera; linux-input@xxxxxxxxxxxxxxx;
> > > > > devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> > > > > Purdila, Octavian
> > > > > Subject: Re: [PATCH 6/9] input: goodix: write configuration data to
> > > > > device
> > > > >
> > > > > On Thu, May 28, 2015 at 01:47:42PM +0100, Irina Tirdea wrote:
> > > > > > Goodix devices can be configured by writing this information
> > > > > > to the device at init. The configuration data can
> > > > > > be provided through the ACPI/device tree property
> > > > > > "device-config". If "device-config" is not set, the default
> > > > > > device configuration will be used.
> > > > > >
> > > > > > Signed-off-by: Octavian Purdila <octavian.purdila@xxxxxxxxx>
> > > > > > Signed-off-by: Irina Tirdea <irina.tirdea@xxxxxxxxx>
> > > > > > ---
> > > > > >  .../bindings/input/touchscreen/goodix.txt          |   5 +
> > > > > >  drivers/input/touchscreen/goodix.c                 | 143
> > > > > > +++++++++++++++++++++
> > > > > >  2 files changed, 148 insertions(+)
> > > > > >
> > > > > > diff --git
> > > > > > a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> > > > > b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> > > > > > index 7137881..9e4ff69 100644
> > > > > > ---
> > > > > > a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> > > > > > +++
> > > > > > b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> > > > > > @@ -15,6 +15,11 @@ Required properties:
> > > > > >   - irq-gpio              : GPIO pin used for IRQ
> > > > > >   - reset-gpio            : GPIO pin used for reset
> > > > > >
> > > > > > +Optional properties:
> > > > > > +
> > > > > > + - device-config : device configuration information
> > > > > > (specified as byte
> > > > > > +                   array). Maximum size is 240 bytes.
> > > > >
> > > > > Generally we frown on passing opaque data.
> > > > >
> > > > > What exactly is encoded in device-config? The description is very
> > > > > vague.
> > > > >
> > > > > Does this correspond to anything in a data sheet or manual?
> > > >
> > > > Yes, it is configuration data described in chapter 6.2. b of the
> > > > datasheet:
> > > > https://drive.google.com/folderview?id=0BxCVOQS3ZymGfmJyY2RKbE5XbVlKN
> > > > lktVTlwV0lxNEdxd2dzeWZER094cmJPVnMxN1F0Yzg&usp=sharing.
> > > > This includes things like x/y resolution, maximum touch numbers
> > > > supported,
> > > > interrupt flags, various sensitivity factors.
> > > >
> > > > I should have included a link to the datasheet in the commit message
> > > > - will do that in v2 for all patches.
> > > >
> > > > I did consider writing this as firmware, but it seems that some
> > > > Goodix touchscreens have a
> > > > real firmware they need to write in addition to this configuration
> > > > data.
> > > > If there is a better way to do this, please let me know and I will
> > > > change it.
> > >
> > > I would at least expect an excerpt from an ACPI DSDT that would make
> > > use of that feature.
> >
> > Ok, I will add this to the commit message.
> 
> No, it really shoudl be done via request_firmware() mechanism. There are
> drivers in kernel that use request_firmware() for both firmware and
> configuration data (see elan_i2c, elants_i2c, atmel_mxt_ts and I am sure
> there are others).
> 

Ok, I didn't know there are these other drivers that already do that.
I will change this to use request_firmware then.

Thanks,
Irina

> Thanks.
> 
> --
> Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/