Re: [PATCH 3/3] dt: Document Holt descrete ADC bindings

[Jonathan Cameron]

On 01/06/15 13:20, Vladimir Barinov wrote:
> These bindings can be used to register Holt HI-8435/8436/8437 descrete ADC
> 
> Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/iio/adc/hi-843x.txt        | 27 ++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/hi-843x.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/hi-843x.txt b/Documentation/devicetree/bindings/iio/adc/hi-843x.txt
> new file mode 100644
> index 0000000..872e801
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/hi-843x.txt
> @@ -0,0 +1,27 @@
> +Holt Integrated Circuits HI-8435/8436/8437 discrete ADC bindings
> +
> +Required properties:
> + - compatible: Should be "holt,hi-8435" or "holt,hi-8436" or "holt,hi-8437"
> + - reg: spi chip select number for the device
> +
> +Recommended properties:
> + - spi-max-frequency: Definition as per
> +		Documentation/devicetree/bindings/spi/spi-bus.txt
> +
> +Optional properties:
> + - holt,mr-gpio: GPIO used for controlling the MR (chip reset) pin
Unless there is anything unusual about the chip reset line, I'd 
be tempted to go with reset-gpios which seems to be somewhat
of a convention based on a quick grep of existing bindings.
> + - holt,debounce-soft: enable software debounce at startup
> + - holt,debounce-soft-delay: software debounce interval in milliseconds
> +
> +Example:
> +adc@0 {
> +	compatible = "holt,hi-8435";
> +	reg = <0>;
> +
> +	holt,mr-gpio = <&gpio6 1 0>;
> +
> +	holt,debounce-soft;
> +	holt,debounce-soft-delay = <100>;
> +
> +	spi-max-frequency = <1000000>;
> +};
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/