Re: [PATCH 1/2] iio: adc: twl4030_madc: Fix calculation of the temperature sense current

[Dr. H. Nikolaus Schaller]

Am 07.06.2015 um 18:25 schrieb Jonathan Cameron <jic23@xxxxxxxxxx>:

> On 28/05/15 20:50, Marek Belisko wrote:
>> From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
>> 
>> The bit mask to read the setting of the constant current source
>> for measuring the NTC voltage was the wrong one. Since default
>> value is initialized to the lowest level (000 = 10uA) the difference
>> was probably never noticed in practice.
> I'm going to take that literally and apply it via the slow route on
> the basis that a bug no one noticed doesn’t need fixing fast!

Yes, that is fine.

>> 
>> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
>> Signed-off-by: Marek Belisko <marek@xxxxxxxxxxxxx>
> Applied to the togreg branch of iio.git - initially pushed out as
> testing for the autobuilders to play with it.
> 
> Thanks,
> 
> Jonathan

Thanks,
Nikolaus

>> ---
>> drivers/iio/adc/twl4030-madc.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>> 
>> diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c
>> index 94c5f05..6d2d429 100644
>> --- a/drivers/iio/adc/twl4030-madc.c
>> +++ b/drivers/iio/adc/twl4030-madc.c
>> @@ -235,7 +235,7 @@ static int twl4030battery_temperature(int raw_volt)
>> 	if (ret < 0)
>> 		return ret;
>> 
>> -	curr = ((val & TWL4030_BCI_ITHEN) + 1) * 10;
>> +	curr = ((val & TWL4030_BCI_ITHSENS) + 1) * 10;
>> 	/* Getting and calculating the thermistor resistance in ohms */
>> 	res = volt * 1000 / curr;
>> 	/* calculating temperature */
>> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/