[PATCH v7 8/8] mfd: cros_ec: spi: Add delay for asserting CS

[Javier Martinez Canillas]

From: Alexandru M Stan <amstan@xxxxxxxxxxxx>

Some ECs need a little time for waking up before they can accept
SPI data at a high speed. This is configurable via a DT property
"google,cros-ec-spi-pre-delay".

This patch makes the cros_ec_spi driver to cause a delay before
the beginning of a SPI transaction, to make sure that the EC has
already woken up, if the property has been defined in the DTS.

Signed-off-by: Alexandru M Stan <amstan@xxxxxxxxxxxx>
Reviewed-by: Doug Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>
Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
Tested-by: Heiko Stuebner <heiko@xxxxxxxxx>
Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
Acked-by: Olof Johansson <olof@xxxxxxxxx>
---

Changes since v6:
 - Add Olof Johansson Acked-by tag

Changes since v5: None.

Changes since v4: None.

Changes since v3:
 - New patch, split DT binding and driver implementation as suggested
   by Lee Jones.
 - Add tested-by tag from Heiko Stuebner.
 - Add acked-by tag from Lee Jones.
---
 drivers/mfd/cros_ec_spi.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
index faba03e2f1ef..16f228dc243f 100644
--- a/drivers/mfd/cros_ec_spi.c
+++ b/drivers/mfd/cros_ec_spi.c
@@ -71,12 +71,15 @@
  * @spi: SPI device we are connected to
  * @last_transfer_ns: time that we last finished a transfer, or 0 if there
  *	if no record
+ * @start_of_msg_delay: used to set the delay_usecs on the spi_transfer that
+ *      is sent when we want to turn on CS at the start of a transaction.
  * @end_of_msg_delay: used to set the delay_usecs on the spi_transfer that
  *      is sent when we want to turn off CS at the end of a transaction.
  */
 struct cros_ec_spi {
 	struct spi_device *spi;
 	s64 last_transfer_ns;
+	unsigned int start_of_msg_delay;
 	unsigned int end_of_msg_delay;
 };
 
@@ -366,7 +369,7 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
 	struct ec_host_request *request;
 	struct ec_host_response *response;
 	struct cros_ec_spi *ec_spi = ec_dev->priv;
-	struct spi_transfer trans;
+	struct spi_transfer trans, trans_delay;
 	struct spi_message msg;
 	int i, len;
 	u8 *ptr;
@@ -393,13 +396,23 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
 		goto exit;
 	}
 
+	/*
+	 * Leave a gap between CS assertion and clocking of data to allow the
+	 * EC time to wakeup.
+	 */
+	spi_message_init(&msg);
+	if (ec_spi->start_of_msg_delay) {
+		memset(&trans_delay, 0, sizeof(trans_delay));
+		trans_delay.delay_usecs = ec_spi->start_of_msg_delay;
+		spi_message_add_tail(&trans_delay, &msg);
+	}
+
 	/* Transmit phase - send our message */
 	memset(&trans, 0, sizeof(trans));
 	trans.tx_buf = ec_dev->dout;
 	trans.rx_buf = rx_buf;
 	trans.len = len;
 	trans.cs_change = 1;
-	spi_message_init(&msg);
 	spi_message_add_tail(&trans, &msg);
 	ret = spi_sync(ec_spi->spi, &msg);
 
@@ -602,6 +615,10 @@ static void cros_ec_spi_dt_probe(struct cros_ec_spi *ec_spi, struct device *dev)
 	u32 val;
 	int ret;
 
+	ret = of_property_read_u32(np, "google,cros-ec-spi-pre-delay", &val);
+	if (!ret)
+		ec_spi->start_of_msg_delay = val;
+
 	ret = of_property_read_u32(np, "google,cros-ec-spi-msg-delay", &val);
 	if (!ret)
 		ec_spi->end_of_msg_delay = val;
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/