RE: [RFC,v3 02/10] dpaa_eth: add support for DPAA Ethernet
From: Madalin-Cristian Bucur
Date: Wed Jun 10 2015 - 05:10:31 EST
Hi Eric,
Can you please tell us if this change would be for the better?
I was about to say yes to this request but checked and no other Ethernet driver seems to use the queue trans_start.
I was able to find your patch "net: tx scalability works : trans_start" [ http://patchwork.ozlabs.org/patch/27104/ ] but did not find more about this topic.
Thank you,
Madalin
> -----Original Message-----
> From: Xie Jianhua-B29408
> Sent: Wednesday, June 10, 2015 9:00 AM
> To: Bucur Madalin-Cristian-B32716; netdev@xxxxxxxxxxxxxxx; linuxppc-
> dev@xxxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Subject: RE: [RFC,v3 02/10] dpaa_eth: add support for DPAA Ethernet
>
>
>
> > -----Original Message-----
> > From: Linuxppc-dev [mailto:linuxppc-dev-
> > bounces+jianhua.xie=freescale.com@xxxxxxxxxxxxxxxx] On Behalf Of
> Madalin
> > Bucur
> > Sent: Wednesday, April 29, 2015 10:57 PM
> > To: netdev@xxxxxxxxxxxxxxx; linuxppc-dev@xxxxxxxxxxxxxxxx
> > Cc: linux-kernel@xxxxxxxxxxxxxxx; Bucur Madalin-Cristian-B32716
> > Subject: [RFC,v3 02/10] dpaa_eth: add support for DPAA Ethernet
> >
> > This introduces the Freescale Data Path Acceleration Architecture
> > (DPAA) Ethernet driver (dpaa_eth) that builds upon the DPAA QMan,
> > BMan, PAMU and FMan drivers to deliver Ethernet connectivity on
> > the Freescale DPAA QorIQ platforms.
> >
> Snip......
>
> > +
> > + if (unlikely(dpa_xmit(priv, percpu_stats, queue_mapping, &fd) < 0))
> > + goto xmit_failed;
> > +
> > + net_dev->trans_start = jiffies;
>
> It is probably better to use netdev_queue->trans_start to instead of
> net_dev->trans_start on SMP.
>
> Best Regards,
> Jianhua
>
> > + return NETDEV_TX_OK;
> > +
> > +xmit_failed:
> > + if (fd.cmd & FM_FD_CMD_FCO) {
> > + (*countptr)--;
> > + dpa_fd_release(net_dev, &fd);
> > + percpu_stats->tx_errors++;
> > + return NETDEV_TX_OK;
> > + }
> > + _dpa_cleanup_tx_fd(priv, &fd);
> > + percpu_stats->tx_errors++;
> > + dev_kfree_skb(skb);
> > + return NETDEV_TX_OK;
> > +}
> > --
> > 1.7.11.7
> >
> > _______________________________________________
> > Linuxppc-dev mailing list
> > Linuxppc-dev@xxxxxxxxxxxxxxxx
> > https://lists.ozlabs.org/listinfo/linuxppc-dev
N§²æ¸yú²X¬¶ÇvØ)Þ{.nÇ·¥{±êX§¶¡Ü}©²ÆzÚj:+v¨¾«êZ+Êzf£¢·h§~Ûÿû®w¥¢¸?¨è&¢)ßfùy§m
á«a¶Úÿ0¶ìå