[PATCH 14/18] sched: Move code around
From: Peter Zijlstra
Date: Thu Jun 11 2015 - 08:56:10 EST
In preparation to reworking set_cpus_allowed_ptr() move some code
around. This also removes some superfluous #ifdefs and adds comments
to some #endifs.
text data bss dec hex filename
12211532 1738144 1081344 15031020 e55aec defconfig-build/vmlinux.pre
12211532 1738144 1081344 15031020 e55aec defconfig-build/vmlinux.post
Signed-off-by: Peter Zijlstra (Intel) <peterz@xxxxxxxxxxxxx>
---
kernel/sched/core.c | 364 +++++++++++++++++++++++++---------------------------
1 file changed, 178 insertions(+), 186 deletions(-)
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -1046,6 +1046,180 @@ void check_preempt_curr(struct rq *rq, s
}
#ifdef CONFIG_SMP
+/*
+ * This is how migration works:
+ *
+ * 1) we invoke migration_cpu_stop() on the target CPU using
+ * stop_one_cpu().
+ * 2) stopper starts to run (implicitly forcing the migrated thread
+ * off the CPU)
+ * 3) it checks whether the migrated task is still in the wrong runqueue.
+ * 4) if it's in the wrong runqueue then the migration thread removes
+ * it and puts it into the right queue.
+ * 5) stopper completes and stop_one_cpu() returns and the migration
+ * is done.
+ */
+
+/*
+ * move_queued_task - move a queued task to new rq.
+ *
+ * Returns (locked) new rq. Old rq's lock is released.
+ */
+static struct rq *move_queued_task(struct task_struct *p, int new_cpu)
+{
+ struct rq *rq = task_rq(p);
+
+ lockdep_assert_held(&rq->lock);
+
+ dequeue_task(rq, p, 0);
+ p->on_rq = TASK_ON_RQ_MIGRATING;
+ set_task_cpu(p, new_cpu);
+ raw_spin_unlock(&rq->lock);
+
+ rq = cpu_rq(new_cpu);
+
+ raw_spin_lock(&rq->lock);
+ BUG_ON(task_cpu(p) != new_cpu);
+ p->on_rq = TASK_ON_RQ_QUEUED;
+ enqueue_task(rq, p, 0);
+ check_preempt_curr(rq, p, 0);
+
+ return rq;
+}
+
+struct migration_arg {
+ struct task_struct *task;
+ int dest_cpu;
+};
+
+/*
+ * Move (not current) task off this cpu, onto dest cpu. We're doing
+ * this because either it can't run here any more (set_cpus_allowed()
+ * away from this CPU, or CPU going down), or because we're
+ * attempting to rebalance this task on exec (sched_exec).
+ *
+ * So we race with normal scheduler movements, but that's OK, as long
+ * as the task is no longer on this CPU.
+ *
+ * Returns non-zero if task was successfully migrated.
+ */
+static int __migrate_task(struct task_struct *p, int src_cpu, int dest_cpu)
+{
+ struct rq *rq;
+ int ret = 0;
+
+ if (unlikely(!cpu_active(dest_cpu)))
+ return ret;
+
+ rq = cpu_rq(src_cpu);
+
+ raw_spin_lock(&p->pi_lock);
+ raw_spin_lock(&rq->lock);
+ /* Already moved. */
+ if (task_cpu(p) != src_cpu)
+ goto done;
+
+ /* Affinity changed (again). */
+ if (!cpumask_test_cpu(dest_cpu, tsk_cpus_allowed(p)))
+ goto fail;
+
+ /*
+ * If we're not on a rq, the next wake-up will ensure we're
+ * placed properly.
+ */
+ if (task_on_rq_queued(p))
+ rq = move_queued_task(p, dest_cpu);
+done:
+ ret = 1;
+fail:
+ raw_spin_unlock(&rq->lock);
+ raw_spin_unlock(&p->pi_lock);
+ return ret;
+}
+
+/*
+ * migration_cpu_stop - this will be executed by a highprio stopper thread
+ * and performs thread migration by bumping thread off CPU then
+ * 'pushing' onto another runqueue.
+ */
+static int migration_cpu_stop(void *data)
+{
+ struct migration_arg *arg = data;
+
+ /*
+ * The original target cpu might have gone down and we might
+ * be on another cpu but it doesn't matter.
+ */
+ local_irq_disable();
+ /*
+ * We need to explicitly wake pending tasks before running
+ * __migrate_task() such that we will not miss enforcing cpus_allowed
+ * during wakeups, see set_cpus_allowed_ptr()'s TASK_WAKING test.
+ */
+ sched_ttwu_pending();
+ __migrate_task(arg->task, raw_smp_processor_id(), arg->dest_cpu);
+ local_irq_enable();
+ return 0;
+}
+
+void do_set_cpus_allowed(struct task_struct *p, const struct cpumask *new_mask)
+{
+ if (p->sched_class->set_cpus_allowed)
+ p->sched_class->set_cpus_allowed(p, new_mask);
+
+ cpumask_copy(&p->cpus_allowed, new_mask);
+ p->nr_cpus_allowed = cpumask_weight(new_mask);
+}
+
+/*
+ * Change a given task's CPU affinity. Migrate the thread to a
+ * proper CPU and schedule it away if the CPU it's executing on
+ * is removed from the allowed bitmask.
+ *
+ * NOTE: the caller must have a valid reference to the task, the
+ * task must not exit() & deallocate itself prematurely. The
+ * call is not atomic; no spinlocks may be held.
+ */
+int set_cpus_allowed_ptr(struct task_struct *p, const struct cpumask *new_mask)
+{
+ unsigned long flags;
+ struct rq *rq;
+ unsigned int dest_cpu;
+ int ret = 0;
+
+ rq = task_rq_lock(p, &flags);
+
+ if (cpumask_equal(&p->cpus_allowed, new_mask))
+ goto out;
+
+ if (!cpumask_intersects(new_mask, cpu_active_mask)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ do_set_cpus_allowed(p, new_mask);
+
+ /* Can the task run on the task's current CPU? If so, we're done */
+ if (cpumask_test_cpu(task_cpu(p), new_mask))
+ goto out;
+
+ dest_cpu = cpumask_any_and(cpu_active_mask, new_mask);
+ if (task_running(rq, p) || p->state == TASK_WAKING) {
+ struct migration_arg arg = { p, dest_cpu };
+ /* Need help from migration thread: drop lock and wait. */
+ task_rq_unlock(rq, p, &flags);
+ stop_one_cpu(cpu_of(rq), migration_cpu_stop, &arg);
+ tlb_migrate_finish(p->mm);
+ return 0;
+ } else if (task_on_rq_queued(p))
+ rq = move_queued_task(p, dest_cpu);
+out:
+ task_rq_unlock(rq, p, &flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(set_cpus_allowed_ptr);
+
void set_task_cpu(struct task_struct *p, unsigned int new_cpu)
{
#ifdef CONFIG_SCHED_DEBUG
@@ -1186,13 +1360,6 @@ int migrate_swap(struct task_struct *cur
return ret;
}
-struct migration_arg {
- struct task_struct *task;
- int dest_cpu;
-};
-
-static int migration_cpu_stop(void *data);
-
/*
* wait_task_inactive - wait for a thread to unschedule.
*
@@ -1325,9 +1492,7 @@ void kick_process(struct task_struct *p)
preempt_enable();
}
EXPORT_SYMBOL_GPL(kick_process);
-#endif /* CONFIG_SMP */
-#ifdef CONFIG_SMP
/*
* ->cpus_allowed is protected by both rq->lock and p->pi_lock
*/
@@ -1432,7 +1597,7 @@ static void update_avg(u64 *avg, u64 sam
s64 diff = sample - *avg;
*avg += diff >> 3;
}
-#endif
+#endif /* CONFIG_SMP */
static void
ttwu_stat(struct task_struct *p, int cpu, int wake_flags)
@@ -4767,149 +4932,6 @@ int task_can_attach(struct task_struct *
}
#ifdef CONFIG_SMP
-/*
- * move_queued_task - move a queued task to new rq.
- *
- * Returns (locked) new rq. Old rq's lock is released.
- */
-static struct rq *move_queued_task(struct task_struct *p, int new_cpu)
-{
- struct rq *rq = task_rq(p);
-
- lockdep_assert_held(&rq->lock);
-
- dequeue_task(rq, p, 0);
- p->on_rq = TASK_ON_RQ_MIGRATING;
- set_task_cpu(p, new_cpu);
- raw_spin_unlock(&rq->lock);
-
- rq = cpu_rq(new_cpu);
-
- raw_spin_lock(&rq->lock);
- BUG_ON(task_cpu(p) != new_cpu);
- p->on_rq = TASK_ON_RQ_QUEUED;
- enqueue_task(rq, p, 0);
- check_preempt_curr(rq, p, 0);
-
- return rq;
-}
-
-void do_set_cpus_allowed(struct task_struct *p, const struct cpumask *new_mask)
-{
- if (p->sched_class->set_cpus_allowed)
- p->sched_class->set_cpus_allowed(p, new_mask);
-
- cpumask_copy(&p->cpus_allowed, new_mask);
- p->nr_cpus_allowed = cpumask_weight(new_mask);
-}
-
-/*
- * This is how migration works:
- *
- * 1) we invoke migration_cpu_stop() on the target CPU using
- * stop_one_cpu().
- * 2) stopper starts to run (implicitly forcing the migrated thread
- * off the CPU)
- * 3) it checks whether the migrated task is still in the wrong runqueue.
- * 4) if it's in the wrong runqueue then the migration thread removes
- * it and puts it into the right queue.
- * 5) stopper completes and stop_one_cpu() returns and the migration
- * is done.
- */
-
-/*
- * Change a given task's CPU affinity. Migrate the thread to a
- * proper CPU and schedule it away if the CPU it's executing on
- * is removed from the allowed bitmask.
- *
- * NOTE: the caller must have a valid reference to the task, the
- * task must not exit() & deallocate itself prematurely. The
- * call is not atomic; no spinlocks may be held.
- */
-int set_cpus_allowed_ptr(struct task_struct *p, const struct cpumask *new_mask)
-{
- unsigned long flags;
- struct rq *rq;
- unsigned int dest_cpu;
- int ret = 0;
-
- rq = task_rq_lock(p, &flags);
-
- if (cpumask_equal(&p->cpus_allowed, new_mask))
- goto out;
-
- if (!cpumask_intersects(new_mask, cpu_active_mask)) {
- ret = -EINVAL;
- goto out;
- }
-
- do_set_cpus_allowed(p, new_mask);
-
- /* Can the task run on the task's current CPU? If so, we're done */
- if (cpumask_test_cpu(task_cpu(p), new_mask))
- goto out;
-
- dest_cpu = cpumask_any_and(cpu_active_mask, new_mask);
- if (task_running(rq, p) || p->state == TASK_WAKING) {
- struct migration_arg arg = { p, dest_cpu };
- /* Need help from migration thread: drop lock and wait. */
- task_rq_unlock(rq, p, &flags);
- stop_one_cpu(cpu_of(rq), migration_cpu_stop, &arg);
- tlb_migrate_finish(p->mm);
- return 0;
- } else if (task_on_rq_queued(p))
- rq = move_queued_task(p, dest_cpu);
-out:
- task_rq_unlock(rq, p, &flags);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(set_cpus_allowed_ptr);
-
-/*
- * Move (not current) task off this cpu, onto dest cpu. We're doing
- * this because either it can't run here any more (set_cpus_allowed()
- * away from this CPU, or CPU going down), or because we're
- * attempting to rebalance this task on exec (sched_exec).
- *
- * So we race with normal scheduler movements, but that's OK, as long
- * as the task is no longer on this CPU.
- *
- * Returns non-zero if task was successfully migrated.
- */
-static int __migrate_task(struct task_struct *p, int src_cpu, int dest_cpu)
-{
- struct rq *rq;
- int ret = 0;
-
- if (unlikely(!cpu_active(dest_cpu)))
- return ret;
-
- rq = cpu_rq(src_cpu);
-
- raw_spin_lock(&p->pi_lock);
- raw_spin_lock(&rq->lock);
- /* Already moved. */
- if (task_cpu(p) != src_cpu)
- goto done;
-
- /* Affinity changed (again). */
- if (!cpumask_test_cpu(dest_cpu, tsk_cpus_allowed(p)))
- goto fail;
-
- /*
- * If we're not on a rq, the next wake-up will ensure we're
- * placed properly.
- */
- if (task_on_rq_queued(p))
- rq = move_queued_task(p, dest_cpu);
-done:
- ret = 1;
-fail:
- raw_spin_unlock(&rq->lock);
- raw_spin_unlock(&p->pi_lock);
- return ret;
-}
#ifdef CONFIG_NUMA_BALANCING
/* Migrate current task p to target_cpu */
@@ -4957,35 +4979,9 @@ void sched_setnuma(struct task_struct *p
enqueue_task(rq, p, 0);
task_rq_unlock(rq, p, &flags);
}
-#endif
-
-/*
- * migration_cpu_stop - this will be executed by a highprio stopper thread
- * and performs thread migration by bumping thread off CPU then
- * 'pushing' onto another runqueue.
- */
-static int migration_cpu_stop(void *data)
-{
- struct migration_arg *arg = data;
-
- /*
- * The original target cpu might have gone down and we might
- * be on another cpu but it doesn't matter.
- */
- local_irq_disable();
- /*
- * We need to explicitly wake pending tasks before running
- * __migrate_task() such that we will not miss enforcing cpus_allowed
- * during wakeups, see set_cpus_allowed_ptr()'s TASK_WAKING test.
- */
- sched_ttwu_pending();
- __migrate_task(arg->task, raw_smp_processor_id(), arg->dest_cpu);
- local_irq_enable();
- return 0;
-}
+#endif /* CONFIG_NUMA_BALANCING */
#ifdef CONFIG_HOTPLUG_CPU
-
/*
* Ensures that the idle task is using init_mm right before its cpu goes
* offline.
@@ -5088,7 +5084,6 @@ static void migrate_tasks(unsigned int d
rq->stop = stop;
}
-
#endif /* CONFIG_HOTPLUG_CPU */
#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SYSCTL)
@@ -5267,7 +5262,7 @@ static void register_sched_domain_sysctl
static void unregister_sched_domain_sysctl(void)
{
}
-#endif
+#endif /* CONFIG_SCHED_DEBUG && CONFIG_SYSCTL */
static void set_rq_online(struct rq *rq)
{
@@ -5414,9 +5409,6 @@ static int __init migration_init(void)
return 0;
}
early_initcall(migration_init);
-#endif
-
-#ifdef CONFIG_SMP
static cpumask_var_t sched_domains_tmpmask; /* sched_domains_mutex */
@@ -6642,7 +6634,7 @@ static int __sdt_alloc(const struct cpum
struct sched_group *sg;
struct sched_group_capacity *sgc;
- sd = kzalloc_node(sizeof(struct sched_domain) + cpumask_size(),
+ sd = kzalloc_node(sizeof(struct sched_domain) + cpumask_size(),
GFP_KERNEL, cpu_to_node(j));
if (!sd)
return -ENOMEM;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/