Re: [PATCH v4 2/8] firmware: add support for ARM System Control and Power Interface(SCPI) protocol

[Sudeep Holla]

On 11/06/15 12:54, Jassi Brar wrote:
> On 8 June 2015 at 16:09, Sudeep Holla <sudeep.holla@xxxxxxx> wrote:
> ...
> > +
> > +static void scpi_process_cmd(struct scpi_chan *ch, u32 cmd)
> > +{
> > +       unsigned long flags;
> > +       struct scpi_xfer *t, *match = NULL;
> > +
> > +       spin_lock_irqsave(&ch->rx_lock, flags);
> > +       if (list_empty(&ch->rx_pending)) {
> > +               spin_unlock_irqrestore(&ch->rx_lock, flags);
> > +               return;
> > +       }
> > +
> > +       list_for_each_entry(t, &ch->rx_pending, node)
> > +               if (CMD_XTRACT_UNIQ(t->cmd) == CMD_XTRACT_UNIQ(cmd)) {
> > +                       list_del(&t->node);
> > +                       match = t;
> > +                       break;
> > +               }
> > +       /* check if wait_for_completion is in progress or timed-out */
> > +       if (match && !completion_done(&match->done)) {
> > +               struct scpi_shared_mem *mem = ch->rx_payload;
> > +               unsigned int len = min(match->rx_len, CMD_SIZE(cmd));
> > +
> > +               match->status = le32_to_cpu(mem->status);
> > +               memcpy_fromio(match->rx_buf, mem->payload, len);
> > +               if (match->rx_len > len)
> > +                       memset(match->rx_buf + len, 0, match->rx_len - len);
> > +               complete(&match->done);
> > +       }
> > +       spin_unlock_irqrestore(&ch->rx_lock, flags);
> > +}
> There doesn't seem to be support for commands sent by remote?
> Something like when remote is the thermal master and it needs to send
> sensor readings crossing thresholds.

SCP firmware claims to support that but never tested on Juno platform.
So I would like to add it when there's first user for that.

Regards,
Sudeep
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/