Re: [PATCH 19/20] [SCSI] mpt3sas: When device is blocked followed by unblock fails, unfreeze the I/Os
From: Johannes Thumshirn
Date: Mon Jun 15 2015 - 06:00:21 EST
On Fri, Jun 12, 2015 at 03:12:31PM +0530, Sreekanth Reddy wrote:
> Issue: When the disks are getting discovered and assigned device
> handles by the kernel, a device block followed by an unblock
> (due to broadcast primitives) issued by the driver is
> interspersed by the kernel changing the state of the device.
> Therefore the unblock by the driver results in a no operation
> within the kernel API.
>
> To fix this one, the below patch checks the return of the unblock API
> and performs a block followed by an unblock to unfreeze the block
> layer's I/O queue. Sufficient checks and prints are also added in the
> driver to identify this condition caused by the kernel.
>
> Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxxxxxxxx>
> ---
> drivers/scsi/mpt3sas/mpt3sas_scsih.c | 89 ++++++++++++++++++++++++++++++------
> 1 file changed, 75 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> index 42bb731..5405a2f 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> @@ -2605,6 +2605,75 @@ _scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc)
> }
>
> /**
> + * _scsih_internal_device_block - block the sdev device
> + * @sdev: per device object
> + * @sas_device_priv_data : per device driver private data
> + *
> + * make sure device is blocked without error, if not
> + * print an error
> + */
> +static void
> +_scsih_internal_device_block(struct scsi_device *sdev,
> + struct MPT3SAS_DEVICE *sas_device_priv_data)
> +{
> + int r = 0;
> +
> + sdev_printk(KERN_INFO, sdev, "device_block, handle(0x%04x)\n",
> + sas_device_priv_data->sas_target->handle);
> + sas_device_priv_data->block = 1;
> +
> + r = scsi_internal_device_block(sdev);
> + if (r == -EINVAL)
> + sdev_printk(KERN_WARNING, sdev,
> + "device_block failed with return(%d) for handle(0x%04x)\n",
> + sas_device_priv_data->sas_target->handle, r);
> +}
> +
> +/**
> + * _scsih_internal_device_unblock - unblock the sdev device
> + * @sdev: per device object
> + * @sas_device_priv_data : per device driver private data
> + * make sure device is unblocked without error, if not retry
> + * by blocking and then unblocking
> + */
> +
> +static void
> +_scsih_internal_device_unblock(struct scsi_device *sdev,
> + struct MPT3SAS_DEVICE *sas_device_priv_data)
> +{
> + int r = 0;
> +
> + sdev_printk(KERN_WARNING, sdev, "device_unblock and setting to running, "
> + "handle(0x%04x)\n", sas_device_priv_data->sas_target->handle);
> + sas_device_priv_data->block = 0;
> + r = scsi_internal_device_unblock(sdev, SDEV_RUNNING);
> + if (r == -EINVAL) {
> + /* The device has been set to SDEV_RUNNING by SD layer during
> + * device addition but the request queue is still stopped by
> + * our earlier block call. We need to perform a block again
> + * to get the device to SDEV_BLOCK and then to SDEV_RUNNING */
> +
> + sdev_printk(KERN_WARNING, sdev,
> + "device_unblock failed with return(%d) for handle(0x%04x) "
> + "performing a block followed by an unblock\n",
> + sas_device_priv_data->sas_target->handle, r);
> + sas_device_priv_data->block = 1;
> + r = scsi_internal_device_block(sdev);
> + if (r)
> + sdev_printk(KERN_WARNING, sdev, "retried device_block "
> + "failed with return(%d) for handle(0x%04x)\n",
> + sas_device_priv_data->sas_target->handle, r);
> +
> + sas_device_priv_data->block = 0;
> + r = scsi_internal_device_unblock(sdev, SDEV_RUNNING);
> + if (r)
> + sdev_printk(KERN_WARNING, sdev, "retried device_unblock"
> + " failed with return(%d) for handle(0x%04x)\n",
> + sas_device_priv_data->sas_target->handle, r);
> + }
> +}
> +
> +/**
> * _scsih_ublock_io_all_device - unblock every device
> * @ioc: per adapter object
> *
> @@ -2623,11 +2692,10 @@ _scsih_ublock_io_all_device(struct MPT3SAS_ADAPTER *ioc)
> if (!sas_device_priv_data->block)
> continue;
>
> - sas_device_priv_data->block = 0;
> dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
> "device_running, handle(0x%04x)\n",
> sas_device_priv_data->sas_target->handle));
> - scsi_internal_device_unblock(sdev, SDEV_RUNNING);
> + _scsih_internal_device_unblock(sdev, sas_device_priv_data);
> }
> }
>
> @@ -2652,10 +2720,9 @@ _scsih_ublock_io_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address)
> if (sas_device_priv_data->sas_target->sas_address
> != sas_address)
> continue;
> - if (sas_device_priv_data->block) {
> - sas_device_priv_data->block = 0;
> - scsi_internal_device_unblock(sdev, SDEV_RUNNING);
> - }
> + if (sas_device_priv_data->block)
> + _scsih_internal_device_unblock(sdev,
> + sas_device_priv_data);
> }
> }
>
> @@ -2678,10 +2745,7 @@ _scsih_block_io_all_device(struct MPT3SAS_ADAPTER *ioc)
> continue;
> if (sas_device_priv_data->block)
> continue;
> - sas_device_priv_data->block = 1;
> - scsi_internal_device_block(sdev);
> - sdev_printk(KERN_INFO, sdev, "device_blocked, handle(0x%04x)\n",
> - sas_device_priv_data->sas_target->handle);
> + _scsih_internal_device_block(sdev, sas_device_priv_data);
> }
> }
>
> @@ -2713,10 +2777,7 @@ _scsih_block_io_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
> continue;
> if (sas_device->pend_sas_rphy_add)
> continue;
> - sas_device_priv_data->block = 1;
> - scsi_internal_device_block(sdev);
> - sdev_printk(KERN_INFO, sdev,
> - "device_blocked, handle(0x%04x)\n", handle);
> + _scsih_internal_device_block(sdev, sas_device_priv_data);
> }
> }
>
> --
> 2.0.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Reviewed-by: Johannes Thumshirn <jthumshirn@xxxxxxx>
--
Johannes Thumshirn Storage
jthumshirn@xxxxxxx +49 911 74053 689
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/