Re: [RESEND PATCH 2/2] pinctrl: introduce complex pin description

[Stephen Warren]

On 06/10/2015 09:04 AM, Ludovic Desroches wrote:
> Using a string to describe a pin in the device tree can be not enough.
> Some controllers may need extra information to fully describe a pin. It
> concerns mainly controllers which have a per pin muxing approach which
> don't fit well the notions of groups and functions.
> Instead of using a pin name, a 32 bit value is used. The 16 least
> significant bits are used for the pin number. Other 16 bits can be used to
> store extra parameters.

The driver for the pin controller is supposed to provide this 
information in a table. The whole point of having a driver, rather than 
a table/list of raw register values in the DT, is so the driver can 
provide this information at a semantic level. This information is fixed 
per SoC and so make sense to put into a driver, while the board-specific 
configuration varies wildly, and hence makes sense to put into DT.


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/