[PATCH 04/10] dma: sdma-imx set dma script address directly

From: Joshua Clayton
Date: Mon Jun 15 2015 - 12:19:37 EST


SDMA uses different firmware scripts per device type and per
direction, but only one script per channel may be used at a time.
By moving the call to sdma_get_pc() into get_context, it will
be called any time the dma direction may change.

Then there is no need to store multiple script addresses, so those
may be removed from struct sdma_channel.

We also add an error message should setting the script fail to
find a valid script address.

Signed-off-by: Joshua Clayton <stillcompiling@xxxxxxxxx>
---
drivers/dma/imx-sdma.c | 34 ++++++++++++++++------------------
1 file changed, 16 insertions(+), 18 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 7c8703f..fdf88c4 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -257,7 +257,6 @@ struct sdma_channel {
unsigned int period_len;
struct sdma_buffer_descriptor *bd;
dma_addr_t bd_phys;
- unsigned int pc_from_device, pc_to_device;
unsigned long flags;
dma_addr_t per_address;
unsigned long event_mask[2];
@@ -688,8 +687,8 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id)
/*
* sets the pc of SDMA script according to the peripheral type
*/
-static void sdma_get_pc(struct sdma_channel *sdmac,
- enum sdma_peripheral_type peripheral_type)
+static s32 sdma_get_pc(struct sdma_channel *sdmac,
+ enum dma_transfer_direction direction)
{
struct sdma_engine *sdma = to_sdma_engine(sdmac);
int per_2_emi = 0, emi_2_per = 0;
@@ -699,10 +698,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
*/
int per_2_per = 0, emi_2_emi = 0;

- sdmac->pc_from_device = 0;
- sdmac->pc_to_device = 0;
-
- switch (peripheral_type) {
+ switch (sdmac->peripheral_type) {
case IMX_DMATYPE_MEMORY:
emi_2_emi = sdma->script_addrs->ap_2_ap_addr;
break;
@@ -774,8 +770,14 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
break;
}

- sdmac->pc_from_device = per_2_emi;
- sdmac->pc_to_device = emi_2_per;
+ switch (direction) {
+ case DMA_MEM_TO_DEV:
+ return emi_2_per;
+ case DMA_DEV_TO_MEM:
+ return per_2_emi;
+ default:
+ return 0;
+ }
}

static int sdma_load_context(struct sdma_channel *sdmac)
@@ -788,15 +790,13 @@ static int sdma_load_context(struct sdma_channel *sdmac)
int ret;
unsigned long flags;

- if (sdmac->direction == DMA_DEV_TO_MEM) {
- load_address = sdmac->pc_from_device;
- } else {
- load_address = sdmac->pc_to_device;
+ load_address = sdma_get_pc(sdmac, sdmac->direction);
+ if (!load_address) {
+ dev_err(sdma->dev, "SDMA channel %d: No dma script found\n",
+ channel);
+ return -EFAULT;
}

- if (load_address < 0)
- return load_address;
-
dev_dbg(sdma->dev, "load_address = %d\n", load_address);
dev_dbg(sdma->dev, "wml = 0x%08x\n", (u32)sdmac->watermark_level);
dev_dbg(sdma->dev, "shp_addr = 0x%08x\n", sdmac->shp_addr);
@@ -867,8 +867,6 @@ static int sdma_config_channel(struct sdma_channel *sdmac)
break;
}

- sdma_get_pc(sdmac, sdmac->peripheral_type);
-
if ((sdmac->peripheral_type != IMX_DMATYPE_MEMORY) &&
(sdmac->peripheral_type != IMX_DMATYPE_DSP)) {
/* Handle multiple event channels differently */
--
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/