[PATCH] power_supply: rt9455_charger: Properly notify userspace about charging events

From: Anda-Maria Nicolae
Date: Wed Jun 17 2015 - 12:25:38 EST


Do not call power_supply_changed() when CHRVPI interrupt has occurred.
CHRVPI interrupt occurs when the charger is connected to or disconnected
from the power source. Call power_supply_changed() after PWR_RDY bit is
read, to distinguish between connection to or disconnection from the power
source.
Also, call power_supply_changed() after the battery is reconnected to the
charger, to notify userspace that the battery is no longer absent.

Signed-off-by: Anda-Maria Nicolae <anda-maria.nicolae@xxxxxxxxx>
---
drivers/power/rt9455_charger.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/power/rt9455_charger.c b/drivers/power/rt9455_charger.c
index 08baac6..a49a9d4 100644
--- a/drivers/power/rt9455_charger.c
+++ b/drivers/power/rt9455_charger.c
@@ -973,7 +973,6 @@ static int rt9455_irq_handler_check_irq2_register(struct rt9455_info *info,

if (irq2 & GET_MASK(F_CHRVPI)) {
dev_dbg(dev, "Charger fault occurred\n");
- alert_userspace = true;
/*
* CHRVPI bit is set in 2 cases:
* 1. when the power source is connected to the charger.
@@ -981,6 +980,9 @@ static int rt9455_irq_handler_check_irq2_register(struct rt9455_info *info,
* To identify the case, PWR_RDY bit is checked. Because
* PWR_RDY bit is set / cleared after CHRVPI interrupt is
* triggered, it is used delayed_work to later read PWR_RDY bit.
+ * Also, do not set to true alert_userspace, because there is no
+ * need to notify userspace when CHRVPI interrupt has occurred.
+ * Userspace will be notified after PWR_RDY bit is read.
*/
queue_delayed_work(system_power_efficient_wq,
&info->pwr_rdy_work,
@@ -1178,7 +1180,7 @@ static irqreturn_t rt9455_irq_handler_thread(int irq, void *data)
/*
* Sometimes, an interrupt occurs while rt9455_probe() function
* is executing and power_supply_register() is not yet called.
- * Do not call power_supply_charged() in this case.
+ * Do not call power_supply_changed() in this case.
*/
if (info->charger)
power_supply_changed(info->charger);
@@ -1478,6 +1480,11 @@ static void rt9455_pwr_rdy_work_callback(struct work_struct *work)
RT9455_MAX_CHARGING_TIME * HZ);
break;
}
+ /*
+ * Notify userspace that the charger has been either connected to or
+ * disconnected from the power source.
+ */
+ power_supply_changed(info->charger);
}

static void rt9455_max_charging_time_work_callback(struct work_struct *work)
@@ -1533,6 +1540,11 @@ static void rt9455_batt_presence_work_callback(struct work_struct *work)
if (ret)
dev_err(dev, "Failed to unmask BATAB interrupt\n");
}
+ /*
+ * Notify userspace that the battery is now connected to the
+ * charger.
+ */
+ power_supply_changed(info->charger);
}
}

--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/