[PATCH v2 1/2] mfd: devicetree: add bindings for Atmel Flexcom

[Cyrille Pitchen]

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
---
 .../devicetree/bindings/mfd/atmel-flexcom.txt      | 58 ++++++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt

diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
new file mode 100644
index 0000000..38f0e43
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
@@ -0,0 +1,58 @@
+* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
+
+The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
+controller and an USART. Only one function can be used at a time and is chosen
+at boot time according to the device tree.
+
+Required properties:
+- compatible: "atmel,sama5d2-flexcom"
+- reg: shall be the offset/length value for Flexcom dedicated I/O registers
+  (without USART, TWI or SPI registers).
+- clocks: shall be the Flexcom peripheral clock from PMC.
+- #address-cells: should be <1>
+- #size-cells: should be <1>
+- ranges: one range for the full I/O register region (including USART, TWI and
+  SPI registers)
+- atmel,flexcom-mode: shall be a string among { "spi", "usart", "i2c", "twi" }.
+  "i2c" and "twi" are synonymous.
+
+Required child:
+a child device of type matching the "atmel,flexcom-mode" property.
+The reg property of this child should be:
+- <0x200 0x200> for USART
+- <0x400 0x200> for SPI
+- <0x600 0x200> for I2C
+The phandle provided by the clocks property of the child is the same as one for
+the Flexcom parent.
+Other properties remain unchanged. See documentation of the respective device.
+
+Example:
+
+flx0: flexcom@f8034000 {
+	compatible = "atmel,sama5d2-flexcom";
+	reg = <0xf8034000 0x200>;
+	clocks = <&flx0_clk>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x0 0xf8034000 0x800>;
+	atmel,flexcom-mode = "spi";
+
+	spi@f8034400 {
+		compatible = "atmel,at91rm9200-spi";
+		reg = <0x400 0x200>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_ioset1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&flx0_clk>;
+		clock-names = "spi_clk";
+		atmel,fifo-size = <32>;
+
+		mtd_dataflash@0 {
+			compatible = "atmel,at25f512b";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+};
-- 
1.8.2.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/