Re: [PATCH 31/41] clocksource: atmel-st: Migrate to new 'set-state' interface
From: Alexandre Belloni
Date: Thu Jun 18 2015 - 10:40:10 EST
On 18/06/2015 at 16:24:45 +0530, Viresh Kumar wrote :
> Migrate atmel-st driver to the new 'set-state' interface provided by
> clockevents core, the earlier 'set-mode' interface is marked obsolete
> now.
>
> This also enables us to implement callbacks for new states of clockevent
> devices, for example: ONESHOT_STOPPED.
>
> Cc: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
> Cc: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
> Cc: Jean-Christophe Plagniol-Villard <plagnioj@xxxxxxxxxxxx>
> Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
Acked-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
I think that anyway I'm the only one booting a kernel from after 3.0 on
the rm9200. I'll test boot that when 4.3-rc1 is released.
> ---
> drivers/clocksource/timer-atmel-st.c | 69 ++++++++++++++++++++++--------------
> 1 file changed, 42 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/clocksource/timer-atmel-st.c b/drivers/clocksource/timer-atmel-st.c
> index 1692e17e096b..41b7b6dc1d0d 100644
> --- a/drivers/clocksource/timer-atmel-st.c
> +++ b/drivers/clocksource/timer-atmel-st.c
> @@ -106,36 +106,47 @@ static struct clocksource clk32k = {
> .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> };
>
> -static void
> -clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
> +static void clkdev32k_disable_and_flush_irq(void)
> {
> unsigned int val;
>
> /* Disable and flush pending timer interrupts */
> regmap_write(regmap_st, AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
> regmap_read(regmap_st, AT91_ST_SR, &val);
> -
> last_crtr = read_CRTR();
> - switch (mode) {
> - case CLOCK_EVT_MODE_PERIODIC:
> - /* PIT for periodic irqs; fixed rate of 1/HZ */
> - irqmask = AT91_ST_PITS;
> - regmap_write(regmap_st, AT91_ST_PIMR, RM9200_TIMER_LATCH);
> - break;
> - case CLOCK_EVT_MODE_ONESHOT:
> - /* ALM for oneshot irqs, set by next_event()
> - * before 32 seconds have passed
> - */
> - irqmask = AT91_ST_ALMS;
> - regmap_write(regmap_st, AT91_ST_RTAR, last_crtr);
> - break;
> - case CLOCK_EVT_MODE_SHUTDOWN:
> - case CLOCK_EVT_MODE_UNUSED:
> - case CLOCK_EVT_MODE_RESUME:
> - irqmask = 0;
> - break;
> - }
> +}
> +
> +static int clkevt32k_shutdown(struct clock_event_device *evt)
> +{
> + clkdev32k_disable_and_flush_irq();
> + irqmask = 0;
> + regmap_write(regmap_st, AT91_ST_IER, irqmask);
> + return 0;
> +}
> +
> +static int clkevt32k_set_oneshot(struct clock_event_device *dev)
> +{
> + clkdev32k_disable_and_flush_irq();
> +
> + /*
> + * ALM for oneshot irqs, set by next_event()
> + * before 32 seconds have passed.
> + */
> + irqmask = AT91_ST_ALMS;
> + regmap_write(regmap_st, AT91_ST_RTAR, last_crtr);
> regmap_write(regmap_st, AT91_ST_IER, irqmask);
> + return 0;
> +}
> +
> +static int clkevt32k_set_periodic(struct clock_event_device *dev)
> +{
> + clkdev32k_disable_and_flush_irq();
> +
> + /* PIT for periodic irqs; fixed rate of 1/HZ */
> + irqmask = AT91_ST_PITS;
> + regmap_write(regmap_st, AT91_ST_PIMR, RM9200_TIMER_LATCH);
> + regmap_write(regmap_st, AT91_ST_IER, irqmask);
> + return 0;
> }
>
> static int
> @@ -170,11 +181,15 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
> }
>
> static struct clock_event_device clkevt = {
> - .name = "at91_tick",
> - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
> - .rating = 150,
> - .set_next_event = clkevt32k_next_event,
> - .set_mode = clkevt32k_mode,
> + .name = "at91_tick",
> + .features = CLOCK_EVT_FEAT_PERIODIC |
> + CLOCK_EVT_FEAT_ONESHOT,
> + .rating = 150,
> + .set_next_event = clkevt32k_next_event,
> + .set_state_shutdown = clkevt32k_shutdown,
> + .set_state_periodic = clkevt32k_set_periodic,
> + .set_state_oneshot = clkevt32k_set_oneshot,
> + .tick_resume = clkevt32k_shutdown,
> };
>
> /*
> --
> 2.4.0
>
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/