[PATCH v6 22/25] clk: tegra: pll: Fix issues with rates for VCO PLLs

[Rhyland Klein]

From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>

Without this change clk_get_rate would return the final output
rather than the VCO output as it would factor in the pdiv when
it shouldn't. This will cause problems for all dividers in the
subtree of the VCO PLL.

Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
Reviewed-by: Benson Leung <bleung@xxxxxxxxxxxx>
Signed-off-by: Rhyland Klein <rklein@xxxxxxxxxx>
---
v5:
  - Switched to using flag for VCO_OUT

v3:
  - Added fix for this bug which was found during testing

 drivers/clk/tegra/clk-pll.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 7c166894babf..61bd15f9478d 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -743,6 +743,8 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 		spin_lock_irqsave(pll->lock, flags);
 
 	_get_pll_mnp(pll, &old_cfg);
+	if (pll->params->flags & TEGRA_PLL_VCO_OUT)
+		cfg.p = old_cfg.p;
 
 	if (old_cfg.m != cfg.m || old_cfg.n != cfg.n || old_cfg.p != cfg.p ||
 		old_cfg.sdm_data != cfg.sdm_data)
@@ -803,11 +805,15 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
 
 	_get_pll_mnp(pll, &cfg);
 
-	pdiv = _hw_to_p_div(hw, cfg.p);
-	if (pdiv < 0) {
-		WARN(1, "Clock %s has invalid pdiv value : 0x%x\n",
-			__clk_get_name(hw->clk), cfg.p);
+	if (pll->params->flags & TEGRA_PLL_VCO_OUT) {
 		pdiv = 1;
+	} else {
+		pdiv = _hw_to_p_div(hw, cfg.p);
+		if (pdiv < 0) {
+			WARN(1, "Clock %s has invalid pdiv value : 0x%x\n",
+				__clk_get_name(hw->clk), cfg.p);
+			pdiv = 1;
+		}
 	}
 
 	if (pll->params->set_gain)
@@ -1094,6 +1100,8 @@ static int clk_pllxc_set_rate(struct clk_hw *hw, unsigned long rate,
 		spin_lock_irqsave(pll->lock, flags);
 
 	_get_pll_mnp(pll, &old_cfg);
+	if (pll->params->flags & TEGRA_PLL_VCO_OUT)
+		cfg.p = old_cfg.p;
 
 	if (old_cfg.m != cfg.m || old_cfg.n != cfg.n || old_cfg.p != cfg.p)
 		ret = _program_pll(hw, &cfg, rate);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/