Re: [PATCH v1 06/20] [SCSI] mpt3sas: Provides the physical location of sas drives

[Martin K. Petersen]

>>>>> Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxxx> writes:

> This Patch will provide more details of the devices such as slot
> number, enclosure logical id, enclosure level & connector name in the
> following scenarios, - When end device is added in the topology, -
> When the end device is removed from the setup, - When the SCSI mid
> layer issues TASK ABORT/ DEVICE RESET/ TARGET RESET during error
> handling, - When any command to the device fails with Sense key
> Hardware error or Medium error or Unit Attention, - When firmware
> returns device error or device not ready status for the end device, -
> When a Predicted fault is detected on an end device.

> This information can be used by the user to identify the location of
> the desired drive in the topology.

> Driver will get these information by reading the sas device page0.

Reviewed-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>

-- 
Martin K. Petersen	Oracle Linux Engineering
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/