2015-06-18 3:58 GMT+09:00 Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>:
With addition of DT support to 88pm800 mfd driver, this patch
adds new DT binding documentation along with respective properties.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
---
Documentation/devicetree/bindings/mfd/88pm800.txt | 60 +++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/88pm800.txt
diff --git a/Documentation/devicetree/bindings/mfd/88pm800.txt b/Documentation/devicetree/bindings/mfd/88pm800.txt
new file mode 100644
index 0000000..b8e72df
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/88pm800.txt
@@ -0,0 +1,60 @@
+* Marvell 88PM8xx Power Management IC
+
+Required parent device properties:
+- compatible : "marvell,88pm800", "marvell,88pm805", "marvell,88pm860"
+- reg : the I2C slave address for the 88pm8xx chip
+- interrupts : IRQ line for the 88pm8xx chip
+- interrupt-controller: describes the 88pm8xx as an interrupt controller
+- #interrupt-cells : should be 1.
+ - The cell is the 88pm8xx local IRQ number
+
+Optional parent device properties:
+- marvell,irq-clr-on-write: indicates whether interrupt status is cleared
+ by write or read.
+ If enabled, interrupt is cleared by write else just read would do.
+
+88pm8xx family of devices consists of varied group of sub-devices:
+
+Device Supply Names Description
+------ ------------ -----------
+88pm80x-onkey : : On key
+88pm80x-rtc : : RTC
+88pm80x-regulator : : Regulators
+
+Note: More device list will follow
+
+Example:
+
+ pmic: 88pm800@30 {
+ compatible = "marvell,88pm800";
+ reg = <0x30>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ marvell,irq-clr-on-write;
+
+ regulators {
+ compatible = "marvell,88pm80x-regulator";
+
+ buck1a: BUCK1A {
+ regulator-compatible = "88PM800-BUCK1A";
That's a deprecated property.
Documentation/devicetree/bindings/regulator/regulator.txt