[char-misc-next 1/9] mei: define async notification hbm commands

From: Tomas Winkler
Date: Wed Jun 24 2015 - 05:03:21 EST


FW has gained new capability where a FW client can asynchronously
notify the host that an event has occurred in its process.
The notification doesn't provide any data and host may need to query
further the FW client in order to get details of the event.
Host can subscribe or unsubscribe to the event notification via
designated HBM commands, and also the notification is carried on
a new HBM command.
This patch adds definitions of asynchronous notification HBM commands.

Signed-off-by: Tomas Winkler <tomas.winkler@xxxxxxxxx>
---
drivers/misc/mei/hw.h | 62 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)

diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h
index e961be392fae..a2c7aaba25d4 100644
--- a/drivers/misc/mei/hw.h
+++ b/drivers/misc/mei/hw.h
@@ -95,6 +95,11 @@

#define MEI_HBM_ADD_CLIENT_REQ_CMD 0x0f
#define MEI_HBM_ADD_CLIENT_RES_CMD 0x8f
+
+#define MEI_HBM_NOTIFY_REQ_CMD 0x10
+#define MEI_HBM_NOTIFY_RES_CMD 0x90
+#define MEI_HBM_NOTIFICATION_CMD 0x11
+
/*
* MEI Stop Reason
* used by hbm_host_stop_request.reason
@@ -352,5 +357,62 @@ struct hbm_flow_control {
u8 reserved[MEI_FC_MESSAGE_RESERVED_LENGTH];
} __packed;

+#define MEI_HBM_NOTIFICATION_START 1
+#define MEI_HBM_NOTIFICATION_STOP 0
+/**
+ * struct hbm_notification_request - start/stop notification request
+ *
+ * @hbm_cmd: bus message command header
+ * @me_addr: address of the client in ME
+ * @host_addr: address of the client in the driver
+ * @start: start = 1 or stop = 0 asynchronous notifications
+ */
+struct hbm_notification_request {
+ u8 hbm_cmd;
+ u8 me_addr;
+ u8 host_addr;
+ u8 start;
+} __packed;
+
+/**
+ * struct hbm_notification_response - start/stop notification response
+ *
+ * @hbm_cmd: bus message command header
+ * @me_addr: address of the client in ME
+ * @host_addr: - address of the client in the driver
+ * @status: (mei_hbm_status) response status for the request
+ * - MEI_HBMS_SUCCESS: successful stop/start
+ * - MEI_HBMS_CLIENT_NOT_FOUND: if the connection could not be found.
+ * - MEI_HBMS_ALREADY_STARTED: for start requests for a previously
+ * started notification.
+ * - MEI_HBMS_NOT_STARTED: for stop request for a connected client for whom
+ * asynchronous notifications are currently disabled.
+ *
+ * @start: start = 1 or stop = 0 asynchronous notifications
+ * @reserved: reserved
+ */
+struct hbm_notification_response {
+ u8 hbm_cmd;
+ u8 me_addr;
+ u8 host_addr;
+ u8 status;
+ u8 start;
+ u8 reserved[3];
+} __packed;
+
+/**
+ * struct hbm_notification - notification event
+ *
+ * @hbm_cmd: bus message command header
+ * @me_addr: address of the client in ME
+ * @host_addr: address of the client in the driver
+ * @reserved: reserved for alignment
+ */
+struct hbm_notification {
+ u8 hbm_cmd;
+ u8 me_addr;
+ u8 host_addr;
+ u8 reserved[1];
+} __packed;

#endif
--
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/