[PATCH v6 5/5] block: loop: support DIO & AIO

[Ming Lei]

There are about 3 advantages to use direct I/O and AIO on
read/write loop's backing file:

1) double cache can be avoided, then memory usage gets
decreased a lot

2) not like user space direct I/O, there isn't cost of
pinning pages

3) avoid context switch for obtaining good throughput
- in buffered file read, random I/O top throughput is often obtained
only if they are submitted concurrently from lots of tasks; but for
sequential I/O, most of times they can be hit from page cache, so
concurrent submissions often introduce unnecessary context switch
and can't improve throughput much. There was such discussion[1]
to use non-blocking I/O to improve the problem for application.
- with direct I/O and AIO, concurrent submissions can be
avoided and random read throughput can't be affected meantime

Follows my fio test result:

1. 16 jobs fio test inside ext4 file system over loop block
1) How to run
	- linux kernel: 4.1.0-rc2-next-20150506 with the patchset
	- the loop block is over one image on HDD.
	- linux psync, 16 jobs, size 400M, ext4 over loop block
	- test result: IOPS from fio output

2) Throughput result:
        -------------------------------------------------------------
        test cases          |randread   |read   |randwrite  |write  |
        -------------------------------------------------------------
        base                |240        |8705   |3763       |20914
        -------------------------------------------------------------
        base+loop aio       |242        |9258   |4577       |21451
        -------------------------------------------------------------

3) context switch
        - context switch decreased by ~16% with loop aio for randread,
	and decreased by ~33% for read

4) memory usage
	- After these four tests with loop aio: ~10% memory becomes used
	- After these four tests without loop aio: more than 55% memory
	becomes used

2. single job fio test inside ext4 file system over loop block(for Maxim Patlasov)
1) How to run
	- linux kernel: 4.1.0-rc2-next-20150506 with the patchset
	- the loop block is over one image on HDD.
	- linux psync, 1 job, size 4000M, ext4 over loop block
	- test result: IOPS from fio output

2) Throughput result:
        -------------------------------------------------------------
        test cases          |randread   |read   |randwrite  |write  |
        -------------------------------------------------------------
        base                |109        |21180  |4192       |22782
        -------------------------------------------------------------
        base+loop aio       |114        |21018  |5404       |22670
        -------------------------------------------------------------

3) context switch
        - context switch decreased by ~10% with loop aio for randread,
	and decreased by ~50% for read

4) memory usage
	- After these four tests with loop aio: ~10% memory becomes used
	- After these four tests without loop aio: more than 55% memory
	becomes used

Both 'context switch' and 'memory usage' data are got from sar.

[1] https://lwn.net/Articles/612483/
[2] sar graph when running fio over loop without the patchset
http://kernel.ubuntu.com/~ming/block/loop-aio/v3/lo-nonaio.pdf

[3] sar graph when running fio over loop with the patchset
http://kernel.ubuntu.com/~ming/block/loop-aio/v3/lo-aio.pdf

[4] sar graph when running fio over loop without the patchset
http://kernel.ubuntu.com/~ming/block/loop-aio/v3/lo-nonaio-1job.pdf

[5] sar graph when running fio over loop with the patchset
http://kernel.ubuntu.com/~ming/block/loop-aio/v3/lo-aio-1job.pdf

Signed-off-by: Ming Lei <ming.lei@xxxxxxxxxxxxx>
---
 drivers/block/loop.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++++++--
 drivers/block/loop.h |  2 ++
 2 files changed, 97 insertions(+), 3 deletions(-)

diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 599d668..b0ff9c6 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -389,6 +389,90 @@ static int lo_req_flush(struct loop_device *lo, struct request *rq)
 	return ret;
 }
 
+static inline void handle_partial_read(struct loop_cmd *cmd, long bytes)
+{
+	if (bytes < 0 || (cmd->rq->cmd_flags & REQ_WRITE))
+		return;
+
+	if (unlikely(bytes < blk_rq_bytes(cmd->rq))) {
+		struct bio *bio = cmd->rq->bio;
+
+		bio_advance(bio, bytes);
+		zero_fill_bio(bio);
+	}
+}
+
+static void lo_rw_aio_complete(struct kiocb *iocb, long ret, long ret2)
+{
+	struct loop_cmd *cmd = container_of(iocb, struct loop_cmd, iocb);
+	struct request *rq = cmd->rq;
+
+	handle_partial_read(cmd, ret);
+
+	if (ret > 0)
+		ret = 0;
+	else if (ret < 0)
+		ret = -EIO;
+
+	rq->errors = ret;
+	blk_mq_complete_request(rq);
+}
+
+static int lo_rw_aio(struct loop_device *lo, struct loop_cmd *cmd,
+		     loff_t pos, bool rw)
+{
+	struct iov_iter iter;
+	struct bio_vec *bvec;
+	struct bio *bio = cmd->rq->bio;
+	struct file *file = lo->lo_backing_file;
+	int ret;
+
+	/* nomerge for loop request queue */
+	WARN_ON(cmd->rq->bio != cmd->rq->biotail);
+
+	bvec = __bvec_iter_bvec(bio->bi_io_vec, bio->bi_iter);
+	iov_iter_bvec(&iter, ITER_BVEC | rw, bvec,
+		      bio_segments(bio), blk_rq_bytes(cmd->rq));
+
+	cmd->iocb.ki_pos = pos;
+	cmd->iocb.ki_filp = file;
+	cmd->iocb.ki_complete = lo_rw_aio_complete;
+	cmd->iocb.ki_flags = IOCB_DIRECT;
+
+	if (rw == WRITE)
+		ret = file->f_op->write_iter(&cmd->iocb, &iter);
+	else
+		ret = file->f_op->read_iter(&cmd->iocb, &iter);
+
+	if (ret != -EIOCBQUEUED)
+		cmd->iocb.ki_complete(&cmd->iocb, ret, 0);
+	return 0;
+}
+
+
+static inline int lo_rw_simple(struct loop_device *lo,
+		struct request *rq, loff_t pos, bool rw)
+{
+	struct loop_cmd *cmd = blk_mq_rq_to_pdu(rq);
+
+	if (cmd->use_aio)
+		return lo_rw_aio(lo, cmd, pos, rw);
+
+	/*
+	 * lo_write_simple and lo_read_simple should have been covered
+	 * by io submit style function like lo_rw_aio(), one blocker
+	 * is that lo_read_simple() need to call flush_dcache_page after
+	 * the page is written from kernel, and it isn't easy to handle
+	 * this in io submit style function which submits all segments
+	 * of the req at one time. And direct read IO doesn't need to
+	 * run flush_dcache_page().
+	 */
+	if (rw == WRITE)
+		return lo_write_simple(lo, rq, pos);
+	else
+		return lo_read_simple(lo, rq, pos);
+}
+
 static int do_req_filebacked(struct loop_device *lo, struct request *rq)
 {
 	loff_t pos;
@@ -404,13 +488,13 @@ static int do_req_filebacked(struct loop_device *lo, struct request *rq)
 		else if (lo->transfer)
 			ret = lo_write_transfer(lo, rq, pos);
 		else
-			ret = lo_write_simple(lo, rq, pos);
+			ret = lo_rw_simple(lo, rq, pos, WRITE);
 
 	} else {
 		if (lo->transfer)
 			ret = lo_read_transfer(lo, rq, pos);
 		else
-			ret = lo_read_simple(lo, rq, pos);
+			ret = lo_rw_simple(lo, rq, pos, READ);
 	}
 
 	return ret;
@@ -1530,6 +1614,12 @@ static int loop_queue_rq(struct blk_mq_hw_ctx *hctx,
 	if (lo->lo_state != Lo_bound)
 		return -EIO;
 
+	if (lo->use_dio && !lo->transfer &&
+			!(cmd->rq->cmd_flags & (REQ_FLUSH | REQ_DISCARD)))
+		cmd->use_aio = true;
+	else
+		cmd->use_aio = false;
+
 	queue_kthread_work(&lo->worker, &cmd->work);
 
 	return BLK_MQ_RQ_QUEUE_OK;
@@ -1549,7 +1639,9 @@ static void loop_handle_cmd(struct loop_cmd *cmd)
  failed:
 	if (ret)
 		cmd->rq->errors = -EIO;
-	blk_mq_complete_request(cmd->rq);
+	/* complete non-aio request */
+	if (!cmd->use_aio || ret)
+		blk_mq_complete_request(cmd->rq);
 }
 
 static void loop_queue_work(struct kthread_work *work)
diff --git a/drivers/block/loop.h b/drivers/block/loop.h
index d1de221..fb2237c 100644
--- a/drivers/block/loop.h
+++ b/drivers/block/loop.h
@@ -69,6 +69,8 @@ struct loop_cmd {
 	struct kthread_work work;
 	struct request *rq;
 	struct list_head list;
+	bool use_aio;           /* use AIO interface to handle I/O */
+	struct kiocb iocb;
 };
 
 /* Support for loadable transfer modules */
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/