[PATCH v3 07/19] staging: sm750fb: add space after close brace
From: Juston Li
Date: Wed Jun 24 2015 - 12:31:33 EST
fixes checkpatch.pl error:
ERROR: space required after that close brace '}'
Signed-off-by: Juston Li <juston.h.li@xxxxxxxxx>
---
drivers/staging/sm750fb/ddk750_display.c | 2 +-
drivers/staging/sm750fb/ddk750_mode.c | 2 +-
drivers/staging/sm750fb/ddk750_power.c | 2 +-
drivers/staging/sm750fb/sm750.h | 2 +-
drivers/staging/sm750fb/sm750_cursor.c | 8 ++++----
drivers/staging/sm750fb/sm750_hw.c | 16 ++++++++--------
6 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index c7171a4..4a3cb86 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -166,7 +166,7 @@ static void waitNextVerticalSync(int ctrl, int delay)
while (status == SYSTEM_CTRL_PANEL_VSYNC_INACTIVE);
}
- }else {
+ } else {
/* Do not wait when the Primary PLL is off or display control is already off.
This will prevent the software to wait forever. */
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index efc1fab..3d8b06d 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -109,7 +109,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
if (getChipType() == SM750LE) {
displayControlAdjust_SM750LE(pModeParam, ulTmpValue);
- }else {
+ } else {
ulReg = PEEK32(CRT_DISPLAY_CTRL)
& FIELD_CLEAR(CRT_DISPLAY_CTRL, VSYNC_PHASE)
& FIELD_CLEAR(CRT_DISPLAY_CTRL, HSYNC_PHASE)
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index e2c0bb3..5f697b8 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -8,7 +8,7 @@ void ddk750_setDPMS(DPMS_t state)
if (getChipType() == SM750LE) {
value = PEEK32(CRT_DISPLAY_CTRL);
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(value, CRT_DISPLAY_CTRL, DPMS, state));
- }else {
+ } else {
value = PEEK32(SYSTEM_CTRL);
value= FIELD_VALUE(value, SYSTEM_CTRL, DPMS, state);
POKE32(SYSTEM_CTRL, value);
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index bf894cc..3785afc 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -53,7 +53,7 @@ struct lynx_share{
int mtrr_off;
struct{
int vram;
- }mtrr;
+ } mtrr;
/* all smi graphic adaptor got below attributes */
unsigned long vidmem_start;
unsigned long vidreg_start;
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index 3a21af9..2fcec32 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -143,7 +143,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
if (opr & (0x80 >> j))
{ /* use fg color,id = 2 */
data |= 2 << (j*2);
- }else {
+ } else {
/* use bg color,id = 1 */
data |= 1 << (j*2);
}
@@ -173,7 +173,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
/* need a return */
pstart += offset;
pbuffer = pstart;
- }else {
+ } else {
pbuffer += sizeof(u16);
}
@@ -223,7 +223,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
if (opr & (0x80 >> j))
{ /* use fg color,id = 2 */
data |= 2 << (j*2);
- }else {
+ } else {
/* use bg color,id = 1 */
data |= 1 << (j*2);
}
@@ -242,7 +242,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
/* need a return */
pstart += offset;
pbuffer = pstart;
- }else {
+ } else {
pbuffer += sizeof(u16);
}
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 4dfc6e6..a43f936 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -56,7 +56,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
pr_err("mmio failed\n");
ret = -EFAULT;
goto exit;
- }else {
+ } else {
pr_info("mmio virtual addr = %p\n", share->pvReg);
}
@@ -91,7 +91,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
pr_err("Map video memory failed\n");
ret = -EFAULT;
goto exit;
- }else {
+ } else {
pr_info("video memory vaddr = %p\n", share->pvMem);
}
exit:
@@ -143,7 +143,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
FIELD_SET(PEEK32(SYSTEM_CTRL),
SYSTEM_CTRL,
DPMS, VNHN));
- }else {
+ } else {
POKE32(MISC_CTRL,
FIELD_SET(PEEK32(MISC_CTRL),
MISC_CTRL,
@@ -166,7 +166,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
spec_share->state.pnltype));
break;
}
- }else {
+ } else {
/* for 750LE ,no DVI chip initilization makes Monitor no signal */
/* Set up GPIO for software I2C to program DVI chip in the
Xilinx SP605 board, in order to have video signal.
@@ -236,7 +236,7 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
if (output->paths & sm750_crt)
dispSet |= do_CRT_PRI;
- }else {
+ } else {
pr_info("secondary channel\n");
if (output->paths & sm750_panel)
dispSet |= do_LCD1_SEC;
@@ -245,7 +245,7 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
}
ddk750_setLogicalDispOut(dispSet);
- }else {
+ } else {
/* just open DISPLAY_CONTROL_750LE register bit 3:0*/
u32 reg;
reg = PEEK32(DISPLAY_CONTROL_750LE);
@@ -389,7 +389,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
PANEL_DISPLAY_CTRL, FORMAT,
(var->bits_per_pixel >> 4)
));
- }else {
+ } else {
/* not implemented now */
POKE32(CRT_FB_ADDRESS, crtc->oScreen);
reg = var->xres * (var->bits_per_pixel >> 3);
@@ -563,7 +563,7 @@ void hw_sm750_initAccel(struct lynx_share *share)
reg = FIELD_SET(reg, DE_STATE1, DE_ABORT, OFF);
POKE32(DE_STATE1, reg);
- }else {
+ } else {
/* engine reset */
reg = PEEK32(SYSTEM_CTRL);
reg = FIELD_SET(reg, SYSTEM_CTRL, DE_ABORT, ON);
--
2.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/