Re: [PATCH] fix nct7802_temp_is_visible

[Guenter Roeck]

Hi Constantine,

On 06/24/2015 03:47 PM, Constantine Shulyupin wrote:
> From: const <const@xxxxxxxxxxxxx>
>
> Fixed registers are invisible only when registers' mode is 0
>
> Signed-off-by: Constantine Shulyupin <const@xxxxxxxxxxxxx>
> ---
>   drivers/hwmon/nct7802.c | 8 +++-----
>   1 file changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/hwmon/nct7802.c b/drivers/hwmon/nct7802.c
> index ec56782..65e40c2 100644
> --- a/drivers/hwmon/nct7802.c
> +++ b/drivers/hwmon/nct7802.c
> @@ -541,13 +541,11 @@ static umode_t nct7802_temp_is_visible(struct kobject *kobj,
>   	if (err < 0)
>   		return 0;
>
> -	if (index < 9 &&
> -	    (reg & 03) != 0x01 && (reg & 0x03) != 0x02)		/* RD1 */
> +	if (index < 9 && !(reg & 0x03))			/* RD1 */
>   		return 0;
> -	if (index >= 9 && index < 18 &&
> -	    (reg & 0x0c) != 0x04 && (reg & 0x0c) != 0x08)	/* RD2 */
> +	if (index >= 9 && index < 18 && !(reg & 0x0c))	/* RD2 */
>   		return 0;
> -	if (index >= 18 && index < 27 && (reg & 0x30) != 0x10)	/* RD3 */
> +	if (index >= 18 && index < 27 && !(reg & 0x30))	/* RD3 */

11b sets a sensor to voltage sense mode, not temperature mode.
This is what the inX attributes are for. We can not just display a
random temperature value if a sensor is configured to measure a voltage.

According to my datasheet, 01b (0x10 shifted) is reserved for RD3.
So there is a bug, but it is

	if (index >= 18 && index < 27 && (reg & 0x30) != 0x10)	/* RD3 */
which should be
	if (index >= 18 && index < 27 && (reg & 0x30) != 0x20)	/* RD3 */

Can you send an updated patch ?

Thanks,
Guenter

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/