Re: [PATCH] hwmon: (nct7802) add temperature sensor type attribute

[Guenter Roeck]

Hi Constantine,

On 06/27/2015 02:23 PM, Constantine Shulyupin wrote:
> From: const <const@xxxxxxxxxxxxx>
>
> 0, 3 - Temperature attributes are hidden

Not really per your code (though they should be hidden).

> 1 - Current mode
> 2 - Thermistor mode
Wrong - that should be 3 for current (diode) mode and 4 for thermistor mode.
The values are part of the ABI and must not be changed
(look at the output of the sensors command and you'll understand why).

> Reference:
> Nuvoton Hardware Monitoring IC NCT7802Y
> 7.2.32 Mode Selection Register
> Location : Index 22h
>
> Signed-off-by: Constantine Shulyupin <const@xxxxxxxxxxxxx>
> ---
>   drivers/hwmon/nct7802.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++-
>   scripts/checkpatch.pl   |  2 +-
>   2 files changed, 53 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hwmon/nct7802.c b/drivers/hwmon/nct7802.c
> index 60cf5d1..444eedf 100644
> --- a/drivers/hwmon/nct7802.c
> +++ b/drivers/hwmon/nct7802.c
> @@ -49,7 +49,7 @@ static const u8 REG_VOLTAGE_LIMIT_MSB_SHIFT[2][5] = {
>   #define REG_VOLTAGE_LOW		0x0f
>   #define REG_FANCOUNT_LOW	0x13
>   #define REG_START		0x21
> -#define REG_MODE		0x22
> +#define REG_MODE		0x22 /* 7.2.32 Mode Selection Register */
>   #define REG_PECI_ENABLE		0x23
>   #define REG_FAN_ENABLE		0x24
>   #define REG_VMON_ENABLE		0x25
> @@ -725,7 +725,58 @@ static struct attribute_group nct7802_fan_group = {
>   	.is_visible = nct7802_fan_is_visible,
>   };
>
> +static ssize_t show_temp_type(struct device *dev, struct device_attribute *attr,
> +		char *buf)
> +{
> +	struct nct7802_data *data = dev_get_drvdata(dev);
> +	struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
> +	unsigned int val;
> +	int ret;
> +
> +	ret = regmap_read(data->regmap, REG_MODE, &val);
> +	if (ret < 0)
> +		return ret;
> +
> +	return sprintf(buf, "%u\n", val >> (2 * sattr->index) & 3);

Please convert to correct ABI values.

> +}
> +
> +static ssize_t store_temp_type(struct device *dev,
> +		struct device_attribute *attr, const char *buf, size_t count)
> +{
> +	struct nct7802_data *data = dev_get_drvdata(dev);
> +	struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
> +	unsigned int val;
> +	int err;
> +
> +	err = kstrtouint(buf, 0, &val);
> +	if (err < 0)
> +		return err;
> +	if (val > 0xF)
> +		return -EINVAL;
> +
Please only accept 3 and 4 for the first two sensors,
and only 4 for the third sensor, and convert to register
values as needed.

> +	err = regmap_update_bits(data->regmap, REG_MODE,
> +			3 << 2 * sattr->index, val << 2 * sattr->index);
> +	sysfs_update_group(&dev->kobj, &nct7802_temp_group);
> +	return err ? : count;
> +}
> +
> +/* 7.2.32 Mode Selection Register */
> +static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR,
> +		show_temp_type, store_temp_type, 0);
> +static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR,
> +		show_temp_type, store_temp_type, 1);
> +static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR,
> +		show_temp_type, store_temp_type, 2);

Please align continuation lines with '('.

> +
> +static struct attribute *general_attributes[] = {
> +	&sensor_dev_attr_temp1_type.dev_attr.attr,
> +	&sensor_dev_attr_temp2_type.dev_attr.attr,
> +	&sensor_dev_attr_temp3_type.dev_attr.attr,
> +	NULL
> +};
> +
>   static const struct attribute_group *nct7802_groups[] = {
> +	&(const struct attribute_group){ .attrs = general_attributes },

Please merge the new attributes into temp_group to get correct visibility.

>   	&nct7802_temp_group,
>   	&nct7802_in_group,
>   	&nct7802_fan_group,
> diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
> index 4f484ac..bf9a680 100755
> --- a/scripts/checkpatch.pl
> +++ b/scripts/checkpatch.pl
> @@ -14,7 +14,7 @@ my $V = '0.32';
>
>   use Getopt::Long qw(:config no_auto_abbrev);
>
> -my $LINELENGTH=120;
> +my $LINELENGTH=80;
That doesn't belong here.

>   my $quiet = 0;
>   my $tree = 1;

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/