[PATCH v4 06/19] staging: sm750fb: add space before open brace
From: Juston Li
Date: Mon Jun 29 2015 - 13:59:21 EST
Fixes checkpatch.pl error:
ERROR: space required before the open brace '{'
Signed-off-by: Juston Li <juston.h.li@xxxxxxxxx>
---
drivers/staging/sm750fb/ddk750_display.c | 14 ++++----
drivers/staging/sm750fb/ddk750_mode.c | 8 ++---
drivers/staging/sm750fb/ddk750_power.c | 4 +--
drivers/staging/sm750fb/sm750_accel.c | 6 ++--
drivers/staging/sm750fb/sm750_cursor.c | 14 ++++----
drivers/staging/sm750fb/sm750_hw.c | 56 ++++++++++++++++----------------
6 files changed, 51 insertions(+), 51 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index 973dec3..c7171a4 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -132,7 +132,7 @@ static void setDisplayControl(int ctrl, int dispState)
static void waitNextVerticalSync(int ctrl, int delay)
{
unsigned int status;
- if (!ctrl){
+ if (!ctrl) {
/* primary controller */
/* Do not wait when the Primary PLL is off or display control is already off.
@@ -166,7 +166,7 @@ static void waitNextVerticalSync(int ctrl, int delay)
while (status == SYSTEM_CTRL_PANEL_VSYNC_INACTIVE);
}
- }else{
+ }else {
/* Do not wait when the Primary PLL is off or display control is already off.
This will prevent the software to wait forever. */
@@ -233,14 +233,14 @@ static void swPanelPowerSequence(int disp, int delay)
void ddk750_setLogicalDispOut(disp_output_t output)
{
unsigned int reg;
- if (output & PNL_2_USAGE){
+ if (output & PNL_2_USAGE) {
/* set panel path controller select */
reg = PEEK32(PANEL_DISPLAY_CTRL);
reg = FIELD_VALUE(reg, PANEL_DISPLAY_CTRL, SELECT, (output & PNL_2_MASK)>>PNL_2_OFFSET);
POKE32(PANEL_DISPLAY_CTRL, reg);
}
- if (output & CRT_2_USAGE){
+ if (output & CRT_2_USAGE) {
/* set crt path controller select */
reg = PEEK32(CRT_DISPLAY_CTRL);
reg = FIELD_VALUE(reg, CRT_DISPLAY_CTRL, SELECT, (output & CRT_2_MASK)>>CRT_2_OFFSET);
@@ -250,17 +250,17 @@ void ddk750_setLogicalDispOut(disp_output_t output)
}
- if (output & PRI_TP_USAGE){
+ if (output & PRI_TP_USAGE) {
/* set primary timing and plane en_bit */
setDisplayControl(0, (output&PRI_TP_MASK)>>PRI_TP_OFFSET);
}
- if (output & SEC_TP_USAGE){
+ if (output & SEC_TP_USAGE) {
/* set secondary timing and plane en_bit*/
setDisplayControl(1, (output&SEC_TP_MASK)>>SEC_TP_OFFSET);
}
- if (output & PNL_SEQ_USAGE){
+ if (output & PNL_SEQ_USAGE) {
/* set panel sequence */
swPanelPowerSequence((output&PNL_SEQ_MASK)>>PNL_SEQ_OFFSET, 4);
}
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index cfe528c..efc1fab 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -107,9 +107,9 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
FIELD_SET(0, CRT_DISPLAY_CTRL, PLANE, ENABLE);
- if (getChipType() == SM750LE){
+ if (getChipType() == SM750LE) {
displayControlAdjust_SM750LE(pModeParam, ulTmpValue);
- }else{
+ }else {
ulReg = PEEK32(CRT_DISPLAY_CTRL)
& FIELD_CLEAR(CRT_DISPLAY_CTRL, VSYNC_PHASE)
& FIELD_CLEAR(CRT_DISPLAY_CTRL, HSYNC_PHASE)
@@ -179,7 +179,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
}
#endif
}
- else{
+ else {
ret = -1;
}
return ret;
@@ -193,7 +193,7 @@ int ddk750_setModeTiming(mode_parameter_t *parm, clock_type_t clock)
pll.clockType = clock;
uiActualPixelClk = calcPllValue(parm->pixel_clock, &pll);
- if (getChipType() == SM750LE){
+ if (getChipType() == SM750LE) {
/* set graphic mode via IO method */
outb_p(0x88, 0x3d4);
outb_p(0x06, 0x3d5);
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index a2d9ee6..e2c0bb3 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -5,10 +5,10 @@
void ddk750_setDPMS(DPMS_t state)
{
unsigned int value;
- if (getChipType() == SM750LE){
+ if (getChipType() == SM750LE) {
value = PEEK32(CRT_DISPLAY_CTRL);
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(value, CRT_DISPLAY_CTRL, DPMS, state));
- }else{
+ }else {
value = PEEK32(SYSTEM_CTRL);
value= FIELD_VALUE(value, SYSTEM_CTRL, DPMS, state);
POKE32(SYSTEM_CTRL, value);
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index bb96ea5..25dc15b 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -248,7 +248,7 @@ unsigned int rop2) /* ROP value */
Note that input pitch is BYTE value, but the 2D Pitch register uses
pixel values. Need Byte to pixel conversion.
*/
- if (Bpp == 3){
+ if (Bpp == 3) {
sx *= 3;
dx *= 3;
width *= 3;
@@ -271,7 +271,7 @@ unsigned int rop2) /* ROP value */
FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, (dPitch/Bpp)) |
FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (sPitch/Bpp))); /* dpr3c */
- if (accel->de_wait() != 0){
+ if (accel->de_wait() != 0) {
return -1;
}
@@ -363,7 +363,7 @@ int hw_imageblit(struct lynx_accel *accel,
Note that input pitch is BYTE value, but the 2D Pitch register uses
pixel values. Need Byte to pixel conversion.
*/
- if (bytePerPixel == 3){
+ if (bytePerPixel == 3) {
dx *= 3;
width *= 3;
startBit *= 3;
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index 95cfb8f..3a21af9 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -143,14 +143,14 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
if (opr & (0x80 >> j))
{ /* use fg color,id = 2 */
data |= 2 << (j*2);
- }else{
+ }else {
/* use bg color,id = 1 */
data |= 1 << (j*2);
}
}
#else
- for (j=0;j<8;j++){
- if (mask & (0x80>>j)){
+ for (j=0;j<8;j++) {
+ if (mask & (0x80>>j)) {
if (rop == ROP_XOR)
opr = mask ^ color;
else
@@ -173,7 +173,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
/* need a return */
pstart += offset;
pbuffer = pstart;
- }else{
+ }else {
pbuffer += sizeof(u16);
}
@@ -223,13 +223,13 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
if (opr & (0x80 >> j))
{ /* use fg color,id = 2 */
data |= 2 << (j*2);
- }else{
+ }else {
/* use bg color,id = 1 */
data |= 1 << (j*2);
}
}
#else
- for (j=0;j<8;j++){
+ for (j=0;j<8;j++) {
if (mask & (1<<j))
data |= ((color & (1<<j))?1:2)<<(j*2);
}
@@ -242,7 +242,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
/* need a return */
pstart += offset;
pbuffer = pstart;
- }else{
+ }else {
pbuffer += sizeof(u16);
}
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 5abac9b..4dfc6e6 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -52,11 +52,11 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
/* now map mmio and vidmem*/
share->pvReg = ioremap_nocache(share->vidreg_start, share->vidreg_size);
- if (!share->pvReg){
+ if (!share->pvReg) {
pr_err("mmio failed\n");
ret = -EFAULT;
goto exit;
- }else{
+ }else {
pr_info("mmio virtual addr = %p\n", share->pvReg);
}
@@ -87,11 +87,11 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
share->pvMem = ioremap_wc(share->vidmem_start, share->vidmem_size);
- if (!share->pvMem){
+ if (!share->pvMem) {
pr_err("Map video memory failed\n");
ret = -EFAULT;
goto exit;
- }else{
+ }else {
pr_info("video memory vaddr = %p\n", share->pvMem);
}
exit:
@@ -119,7 +119,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
ddk750_initHw((initchip_param_t *)&spec_share->state.initParm);
/* for sm718,open pci burst */
- if (share->devid == 0x718){
+ if (share->devid == 0x718) {
POKE32(SYSTEM_CTRL,
FIELD_SET(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, PCI_BURST, ON));
}
@@ -133,7 +133,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
if (getChipType() != SM750LE)
{
/* does user need CRT ?*/
- if (spec_share->state.nocrt){
+ if (spec_share->state.nocrt) {
POKE32(MISC_CTRL,
FIELD_SET(PEEK32(MISC_CTRL),
MISC_CTRL,
@@ -143,7 +143,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
FIELD_SET(PEEK32(SYSTEM_CTRL),
SYSTEM_CTRL,
DPMS, VNHN));
- }else{
+ }else {
POKE32(MISC_CTRL,
FIELD_SET(PEEK32(MISC_CTRL),
MISC_CTRL,
@@ -155,7 +155,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
DPMS, VPHP));
}
- switch (spec_share->state.pnltype){
+ switch (spec_share->state.pnltype) {
case sm750_doubleTFT:
case sm750_24TFT:
case sm750_dualTFT:
@@ -166,7 +166,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
spec_share->state.pnltype));
break;
}
- }else{
+ }else {
/* for 750LE ,no DVI chip initilization makes Monitor no signal */
/* Set up GPIO for software I2C to program DVI chip in the
Xilinx SP605 board, in order to have video signal.
@@ -191,7 +191,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
}
/* init 2d engine */
- if (!share->accel_off){
+ if (!share->accel_off) {
hw_sm750_initAccel(share);
}
@@ -228,15 +228,15 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
channel = *output->channel;
- if (getChipType() != SM750LE){
- if (channel == sm750_primary){
+ if (getChipType() != SM750LE) {
+ if (channel == sm750_primary) {
pr_info("primary channel\n");
if (output->paths & sm750_panel)
dispSet |= do_LCD1_PRI;
if (output->paths & sm750_crt)
dispSet |= do_CRT_PRI;
- }else{
+ }else {
pr_info("secondary channel\n");
if (output->paths & sm750_panel)
dispSet |= do_LCD1_SEC;
@@ -245,7 +245,7 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
}
ddk750_setLogicalDispOut(dispSet);
- }else{
+ }else {
/* just open DISPLAY_CONTROL_750LE register bit 3:0*/
u32 reg;
reg = PEEK32(DISPLAY_CONTROL_750LE);
@@ -270,7 +270,7 @@ int hw_sm750_crtc_checkMode(struct lynxfb_crtc* crtc, struct fb_var_screeninfo*
share = container_of(crtc, struct lynxfb_par, crtc)->share;
- switch (var->bits_per_pixel){
+ switch (var->bits_per_pixel) {
case 8:
case 16:
break;
@@ -308,9 +308,9 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
par = container_of(crtc, struct lynxfb_par, crtc);
share = par->share;
#if 1
- if (!share->accel_off){
+ if (!share->accel_off) {
/* set 2d engine pixel format according to mode bpp */
- switch (var->bits_per_pixel){
+ switch (var->bits_per_pixel) {
case 8:
fmt = 0;
break;
@@ -348,12 +348,12 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
pr_debug("Request pixel clock = %lu\n", modparm.pixel_clock);
ret = ddk750_setModeTiming(&modparm, clock);
- if (ret){
+ if (ret) {
pr_err("Set mode timing failed\n");
goto exit;
}
- if (crtc->channel != sm750_secondary){
+ if (crtc->channel != sm750_secondary) {
/* set pitch, offset ,width,start address ,etc... */
POKE32(PANEL_FB_ADDRESS,
FIELD_SET(0, PANEL_FB_ADDRESS, STATUS, CURRENT)|
@@ -389,7 +389,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
PANEL_DISPLAY_CTRL, FORMAT,
(var->bits_per_pixel >> 4)
));
- }else{
+ }else {
/* not implemented now */
POKE32(CRT_FB_ADDRESS, crtc->oScreen);
reg = var->xres * (var->bits_per_pixel >> 3);
@@ -426,7 +426,7 @@ int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort index,
return 0;
}
-int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank){
+int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank) {
int dpms, crtdb;
switch (blank)
@@ -473,7 +473,7 @@ int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank){
return -EINVAL;
}
- if (output->paths & sm750_crt){
+ if (output->paths & sm750_crt) {
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, DPMS, dpms));
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, BLANK, crtdb));
}
@@ -535,13 +535,13 @@ int hw_sm750_setBLANK(struct lynxfb_output* output, int blank)
break;
}
- if (output->paths & sm750_crt){
+ if (output->paths & sm750_crt) {
POKE32(SYSTEM_CTRL, FIELD_VALUE(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, DPMS, dpms));
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, BLANK, crtdb));
}
- if (output->paths & sm750_panel){
+ if (output->paths & sm750_panel) {
POKE32(PANEL_DISPLAY_CTRL, FIELD_VALUE(PEEK32(PANEL_DISPLAY_CTRL), PANEL_DISPLAY_CTRL, DATA, pps));
}
@@ -554,7 +554,7 @@ void hw_sm750_initAccel(struct lynx_share *share)
u32 reg;
enable2DEngine(1);
- if (getChipType() == SM750LE){
+ if (getChipType() == SM750LE) {
reg = PEEK32(DE_STATE1);
reg = FIELD_SET(reg, DE_STATE1, DE_ABORT, ON);
POKE32(DE_STATE1, reg);
@@ -563,7 +563,7 @@ void hw_sm750_initAccel(struct lynx_share *share)
reg = FIELD_SET(reg, DE_STATE1, DE_ABORT, OFF);
POKE32(DE_STATE1, reg);
- }else{
+ }else {
/* engine reset */
reg = PEEK32(SYSTEM_CTRL);
reg = FIELD_SET(reg, SYSTEM_CTRL, DE_ABORT, ON);
@@ -581,7 +581,7 @@ void hw_sm750_initAccel(struct lynx_share *share)
int hw_sm750le_deWait(void)
{
int i=0x10000000;
- while (i--){
+ while (i--) {
unsigned int dwVal = PEEK32(DE_STATE2);
if ((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) == DE_STATE2_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, DE_STATE2, DE_FIFO) == DE_STATE2_DE_FIFO_EMPTY) &&
@@ -598,7 +598,7 @@ int hw_sm750le_deWait(void)
int hw_sm750_deWait(void)
{
int i=0x10000000;
- while (i--){
+ while (i--) {
unsigned int dwVal = PEEK32(SYSTEM_CTRL);
if ((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) == SYSTEM_CTRL_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, SYSTEM_CTRL, DE_FIFO) == SYSTEM_CTRL_DE_FIFO_EMPTY) &&
--
2.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/