Re: [PATCH 1/2] usb: chipidea: Reduce ULPI PHY reset pulse to datasheet spec of 1us

[Peter Chen]

On Fri, Jun 26, 2015 at 03:47:03PM +0200, Mike Looijmans wrote:
> The datasheet for the 334x PHY mentions that a reset can be performed:
> "... by bringing the pin low for a minimum of 1 microsecond and
> then high."
> A delay of 5ms to implement that seems overly long, so reduce it to
> just 1us.
> As for the delay after reset, the datasheet only mentioned that the
> chip will assert the DIR output. 1ms seems like a safe time to wait
> for that to happen, so no change there.
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
> ---
>  drivers/usb/chipidea/core.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index e970863..c865abe 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -664,7 +664,7 @@ static int ci_hdrc_create_ulpi_phy(struct device *dev, struct ci_hdrc *ci)
>  			dev_err(dev, "Failed to request ULPI reset gpio: %d\n", ret);
>  			return ret;
>  		}
> -		msleep(5);
> +		udelay(1);
>  		gpio_set_value_cansleep(reset_gpio, 1);
>  		msleep(1);
>  	}
> -- 
> 1.9.1
> 

We have no such function at mainline code.

-- 

Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/