[PATCH v2 0/9] [New BSP] Add initial support for Freescale Kinetis TWR-K70F120M development kit
From: Paul Osmialowski
Date: Tue Jun 30 2015 - 08:33:35 EST
This is the second iteration of the patchset that adds a basic initial
support to TWR-K70F120M development kit which is based on ARM Cortex-M4
Freescale Kinetis K70 SoC.
Previous iteration met with a broad response for which I would like
to thank everyone involved.
Following is the change list:
1. First three ('controversial') patches are removed.
As long as it doesn't hit platform stability, I don't use these Cortex-M
compiler flags, it should not stop the whole of the patchset.
The idle quirks issue is now addressed by adding idle.c which provides
callback for arm_pm_idle.
The infamous zlib patch was not needed at all - I didn't really check
what it was protecting against.
2. include/mach/idle.h file removed.
3. kinetis_platform.c renamed to kinetis.c, obj-$(CONFIG_MACH_KINETIS)
changed to obj-y, CONFIG_MACH_KINETIS not needed anymore, removed with
the whole of the Kconfig file in mach-kinetis directory.
4. Assuming that fsl-edma and fsl-lpuart drivers handle big-endian properly,
pinctrl, clk and timer drivers now support big-endian the same way
("big-endian" option in .dts).
5. All addresses based on KINETIS_AIPS0PERIPH_BASE and
KINETIS_AIPS1PERIPH_BASE are moved to DT. The struct kinetis_sim_regs
is moved to clk-kinetis.c. As a result whole include/mach/kinetis.h is
now removed.
6. Removed kinetis_map_io() from kinetis.c (formerly kinetis_platform.c).
7. Removed kinetis_init() function along with a call to
of_platform_populate().
8. Removed MACH_KINETIS from arch/arm/tools/mach-types, removed inclusion
of asm/mach-types.h in kinetis.c (formerly kinetis_platform.c).
9. Removed inclusion of linux/clk.h from clk-kinetis.c.
10. Clock and timer drivers are in separate patches now.
11. '&& ARM' removed from drivers/clocksource/Kconfig.
12. s/clk/evt/ in timer-kinetis.c (actually, the affected *_set_mode()
function is replaced by a set of *_set_state_*() functions).
13. Removed pointless raw_local_irq_save/restore() from timer-kinetis.c.
14. Removed overhead () from each of the &(.....) from timer-kinetis.c.
15. Removed unused KINETIS_PITn_IRQ definitions from timer-kinetis.c.
16. Replaced use of IRQ actions with request_irq() in timer-kinetis.c.
17. Removed all uses of KINETIS_MKCG() macro and whole include/mach/power.h
- now all clock gate details are specified directly in the DT.
For each clock gate #clock-cells = <2> where the first part of the gate
address is zero-based gate register number, the second part is the bit
index.
18. Shortened long timer names in timer-kinetis.c.
19. Ensured module friendliness of pinctrl driver (tristate
CONFIG_PINCTRL_KINETIS)
20. Removed txirq_names[] array from fsl-edma.c - sprinft()-generated
strings used instead.
21. fsl-lpuart and fsl-edma related patches are both split into two:
1) changes in the driver and 2) use in platform.
22. Removed all occurences of CONFIG_ARCH_KINETIS from fsl-edma.c - now it
looks more like fsl-lpuart driver (boolean 'kinetis' field in the main
driver structure).
Paul Osmialowski (9):
arm: allow copying of vector table to internal SRAM memory
arm: twr-k70f120m: basic support for Kinetis TWR-K70F120M
arm: twr-k70f120m: clock driver for Kinetis SoC
arm: twr-k70f120m: timer driver for Kinetis SoC
arm: twr-k70f120m: IOMUX driver for Kinetis SoC
arm: twr-k70f120m: extend Freescale eDMA driver with the ability to
support Kinetis SoC
arm: twr-k70f120m: use Freescale eDMA driver with Kinetis SoC
arm: twr-k70f120m: extend Freescale lpuart driver with ability to
support Kinetis SoC
arm: twr-k70f120m: use Freescale lpuart driver with Kinetis SoC
Documentation/devicetree/bindings/arm/fsl.txt | 6 +
.../devicetree/bindings/clock/kinetis-clock.txt | 63 +++
Documentation/devicetree/bindings/dma/fsl-edma.txt | 38 +-
.../bindings/pinctrl/fsl,kinetis-pinctrl.txt | 31 ++
.../devicetree/bindings/serial/fsl-lpuart.txt | 6 +-
.../bindings/timer/fsl,kinetis-pit-timer.txt | 50 ++
arch/arm/Kconfig | 16 +-
arch/arm/Kconfig-nommu | 12 +
arch/arm/Makefile | 1 +
arch/arm/boot/dts/kinetis-twr-k70f120m.dts | 43 ++
arch/arm/boot/dts/kinetis.dtsi | 241 +++++++++
arch/arm/kernel/entry-v7m.S | 3 +
arch/arm/mach-kinetis/Makefile | 5 +
arch/arm/mach-kinetis/Makefile.boot | 3 +
arch/arm/mach-kinetis/idle.c | 27 +
arch/arm/mach-kinetis/include/mach/memory.h | 61 +++
arch/arm/mach-kinetis/kinetis.c | 34 ++
arch/arm/mm/Kconfig | 1 +
arch/arm/mm/proc-v7m.S | 11 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-kinetis.c | 463 ++++++++++++++++++
drivers/clocksource/Kconfig | 5 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-kinetis.c | 321 ++++++++++++
drivers/dma/fsl-edma.c | 114 ++++-
drivers/pinctrl/freescale/Kconfig | 8 +
drivers/pinctrl/freescale/Makefile | 1 +
drivers/pinctrl/freescale/pinctrl-kinetis.c | 541 +++++++++++++++++++++
drivers/tty/serial/fsl_lpuart.c | 90 +++-
29 files changed, 2153 insertions(+), 44 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/kinetis-clock.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,kinetis-pinctrl.txt
create mode 100644 Documentation/devicetree/bindings/timer/fsl,kinetis-pit-timer.txt
create mode 100644 arch/arm/boot/dts/kinetis-twr-k70f120m.dts
create mode 100644 arch/arm/boot/dts/kinetis.dtsi
create mode 100644 arch/arm/mach-kinetis/Makefile
create mode 100644 arch/arm/mach-kinetis/Makefile.boot
create mode 100644 arch/arm/mach-kinetis/idle.c
create mode 100644 arch/arm/mach-kinetis/include/mach/memory.h
create mode 100644 arch/arm/mach-kinetis/kinetis.c
create mode 100644 drivers/clk/clk-kinetis.c
create mode 100644 drivers/clocksource/timer-kinetis.c
create mode 100644 drivers/pinctrl/freescale/pinctrl-kinetis.c
--
2.3.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/