[PATCH 3/4] ARM: tegra: jetson-tk1: Add GK20A GPU DT node

[Alexandre Courbot]

Add the device-tree node for the GK20A GPU and leave it disabled.
It is the responsability of the bootloader to enable it if the
VPR registers have been programmed such as the GPU can operate.

Signed-off-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
---
 arch/arm/boot/dts/tegra124-jetson-tk1.dts | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index ed8a8acd3d34..f0459ea94981 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -53,6 +53,14 @@
 		};
 	};
 
+	gpu@0,57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&vdd_gpu>;
+	};
+
 	pinmux: pinmux@0,70000868 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
@@ -1514,7 +1522,7 @@
 					regulator-always-on;
 				};
 
-				sd6 {
+				vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
-- 
2.4.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/