[PATCH v3 4/4] cpufreq: exynos: remove Exynos5250 specific cpufreq driver support
From: Bartlomiej Zolnierkiewicz
Date: Wed Jul 01 2015 - 09:14:31 EST
Exynos5250 based platforms have switched over to use generic
cpufreq driver for cpufreq functionality. So the Exynos
specific cpufreq support for these platforms can be removed.
Based on the earlier work by Thomas Abraham.
Cc: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
Cc: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
Cc: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
drivers/cpufreq/Kconfig.arm | 11 --
drivers/cpufreq/Makefile | 1 -
drivers/cpufreq/exynos-cpufreq.c | 3 -
drivers/cpufreq/exynos-cpufreq.h | 17 ---
drivers/cpufreq/exynos5250-cpufreq.c | 210 -----------------------------------
5 files changed, 242 deletions(-)
delete mode 100644 drivers/cpufreq/exynos5250-cpufreq.c
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 24e5c66..9ab6388c1 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -47,17 +47,6 @@ config ARM_EXYNOS4X12_CPUFREQ
If in doubt, say N.
-config ARM_EXYNOS5250_CPUFREQ
- bool "SAMSUNG EXYNOS5250"
- depends on SOC_EXYNOS5250
- depends on ARM_EXYNOS_CPUFREQ
- default y
- help
- This adds the CPUFreq driver for Samsung EXYNOS5250
- SoC.
-
- If in doubt, say N.
-
config ARM_EXYNOS_CPU_FREQ_BOOST_SW
bool "EXYNOS Frequency Overclocking - Software"
depends on ARM_EXYNOS_CPUFREQ && THERMAL
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 032745d..6414958 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -55,7 +55,6 @@ obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += arm-exynos-cpufreq.o
arm-exynos-cpufreq-y := exynos-cpufreq.o
arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
-arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
obj-$(CONFIG_ARM_HISI_ACPU_CPUFREQ) += hisi-acpu-cpufreq.o
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index ae5b2bd..71d8891 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -175,9 +175,6 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
} else if (of_machine_is_compatible("samsung,exynos4412")) {
exynos_info->type = EXYNOS_SOC_4412;
ret = exynos4x12_cpufreq_init(exynos_info);
- } else if (of_machine_is_compatible("samsung,exynos5250")) {
- exynos_info->type = EXYNOS_SOC_5250;
- ret = exynos5250_cpufreq_init(exynos_info);
} else {
pr_err("%s: Unknown SoC type\n", __func__);
return -ENODEV;
diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h
index a3855e4..a359db7 100644
--- a/drivers/cpufreq/exynos-cpufreq.h
+++ b/drivers/cpufreq/exynos-cpufreq.h
@@ -20,7 +20,6 @@ enum cpufreq_level_index {
enum exynos_soc_type {
EXYNOS_SOC_4212,
EXYNOS_SOC_4412,
- EXYNOS_SOC_5250,
};
#define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \
@@ -60,14 +59,6 @@ static inline int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
return -EOPNOTSUPP;
}
#endif
-#ifdef CONFIG_ARM_EXYNOS5250_CPUFREQ
-extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *);
-#else
-static inline int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
-{
- return -EOPNOTSUPP;
-}
-#endif
#define EXYNOS4_CLKSRC_CPU 0x14200
#define EXYNOS4_CLKMUX_STATCPU 0x14400
@@ -79,11 +70,3 @@ static inline int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
#define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT (16)
#define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)
-
-#define EXYNOS5_APLL_LOCK 0x00000
-#define EXYNOS5_APLL_CON0 0x00100
-#define EXYNOS5_CLKMUX_STATCPU 0x00400
-#define EXYNOS5_CLKDIV_CPU0 0x00500
-#define EXYNOS5_CLKDIV_CPU1 0x00504
-#define EXYNOS5_CLKDIV_STATCPU0 0x00600
-#define EXYNOS5_CLKDIV_STATCPU1 0x00604
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
deleted file mode 100644
index 3eafdc7..0000000
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Copyright (c) 2010-20122Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS5250 - CPU frequency scaling support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/cpufreq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include "exynos-cpufreq.h"
-
-static struct clk *cpu_clk;
-static struct clk *moutcore;
-static struct clk *mout_mpll;
-static struct clk *mout_apll;
-static struct exynos_dvfs_info *cpufreq;
-
-static unsigned int exynos5250_volt_table[] = {
- 1300000, 1250000, 1225000, 1200000, 1150000,
- 1125000, 1100000, 1075000, 1050000, 1025000,
- 1012500, 1000000, 975000, 950000, 937500,
- 925000
-};
-
-static struct cpufreq_frequency_table exynos5250_freq_table[] = {
- {0, L0, 1700 * 1000},
- {0, L1, 1600 * 1000},
- {0, L2, 1500 * 1000},
- {0, L3, 1400 * 1000},
- {0, L4, 1300 * 1000},
- {0, L5, 1200 * 1000},
- {0, L6, 1100 * 1000},
- {0, L7, 1000 * 1000},
- {0, L8, 900 * 1000},
- {0, L9, 800 * 1000},
- {0, L10, 700 * 1000},
- {0, L11, 600 * 1000},
- {0, L12, 500 * 1000},
- {0, L13, 400 * 1000},
- {0, L14, 300 * 1000},
- {0, L15, 200 * 1000},
- {0, 0, CPUFREQ_TABLE_END},
-};
-
-static struct apll_freq apll_freq_5250[] = {
- /*
- * values:
- * freq
- * clock divider for ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2
- * clock divider for COPY, HPM, RESERVED
- * PLL M, P, S
- */
- APLL_FREQ(1700, 0, 3, 7, 7, 7, 3, 5, 0, 0, 2, 0, 425, 6, 0),
- APLL_FREQ(1600, 0, 3, 7, 7, 7, 1, 4, 0, 0, 2, 0, 200, 3, 0),
- APLL_FREQ(1500, 0, 2, 7, 7, 7, 1, 4, 0, 0, 2, 0, 250, 4, 0),
- APLL_FREQ(1400, 0, 2, 7, 7, 6, 1, 4, 0, 0, 2, 0, 175, 3, 0),
- APLL_FREQ(1300, 0, 2, 7, 7, 6, 1, 3, 0, 0, 2, 0, 325, 6, 0),
- APLL_FREQ(1200, 0, 2, 7, 7, 5, 1, 3, 0, 0, 2, 0, 200, 4, 0),
- APLL_FREQ(1100, 0, 3, 7, 7, 5, 1, 3, 0, 0, 2, 0, 275, 6, 0),
- APLL_FREQ(1000, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 125, 3, 0),
- APLL_FREQ(900, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 150, 4, 0),
- APLL_FREQ(800, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 100, 3, 0),
- APLL_FREQ(700, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 175, 3, 1),
- APLL_FREQ(600, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 200, 4, 1),
- APLL_FREQ(500, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 125, 3, 1),
- APLL_FREQ(400, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 100, 3, 1),
- APLL_FREQ(300, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 200, 4, 2),
- APLL_FREQ(200, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 100, 3, 2),
-};
-
-static void set_clkdiv(unsigned int div_index)
-{
- unsigned int tmp;
-
- /* Change Divider - CPU0 */
-
- tmp = apll_freq_5250[div_index].clk_div_cpu0;
-
- __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU0);
-
- while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU0)
- & 0x11111111)
- cpu_relax();
-
- /* Change Divider - CPU1 */
- tmp = apll_freq_5250[div_index].clk_div_cpu1;
-
- __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU1);
-
- while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU1) & 0x11)
- cpu_relax();
-}
-
-static void set_apll(unsigned int index)
-{
- unsigned int tmp;
- unsigned int freq = apll_freq_5250[index].freq;
-
- /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
- clk_set_parent(moutcore, mout_mpll);
-
- do {
- cpu_relax();
- tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU)
- >> 16);
- tmp &= 0x7;
- } while (tmp != 0x2);
-
- clk_set_rate(mout_apll, freq * 1000);
-
- /* MUX_CORE_SEL = APLL */
- clk_set_parent(moutcore, mout_apll);
-
- do {
- cpu_relax();
- tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU);
- tmp &= (0x7 << 16);
- } while (tmp != (0x1 << 16));
-}
-
-static void exynos5250_set_frequency(unsigned int old_index,
- unsigned int new_index)
-{
- if (old_index > new_index) {
- set_clkdiv(new_index);
- set_apll(new_index);
- } else if (old_index < new_index) {
- set_apll(new_index);
- set_clkdiv(new_index);
- }
-}
-
-int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
-{
- struct device_node *np;
- unsigned long rate;
-
- /*
- * HACK: This is a temporary workaround to get access to clock
- * controller registers directly and remove static mappings and
- * dependencies on platform headers. It is necessary to enable
- * Exynos multi-platform support and will be removed together with
- * this whole driver as soon as Exynos gets migrated to use
- * cpufreq-dt driver.
- */
- np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock");
- if (!np) {
- pr_err("%s: failed to find clock controller DT node\n",
- __func__);
- return -ENODEV;
- }
-
- info->cmu_regs = of_iomap(np, 0);
- if (!info->cmu_regs) {
- pr_err("%s: failed to map CMU registers\n", __func__);
- return -EFAULT;
- }
-
- cpu_clk = clk_get(NULL, "armclk");
- if (IS_ERR(cpu_clk))
- return PTR_ERR(cpu_clk);
-
- moutcore = clk_get(NULL, "mout_cpu");
- if (IS_ERR(moutcore))
- goto err_moutcore;
-
- mout_mpll = clk_get(NULL, "mout_mpll");
- if (IS_ERR(mout_mpll))
- goto err_mout_mpll;
-
- rate = clk_get_rate(mout_mpll) / 1000;
-
- mout_apll = clk_get(NULL, "mout_apll");
- if (IS_ERR(mout_apll))
- goto err_mout_apll;
-
- info->mpll_freq_khz = rate;
- /* 800Mhz */
- info->pll_safe_idx = L9;
- info->cpu_clk = cpu_clk;
- info->volt_table = exynos5250_volt_table;
- info->freq_table = exynos5250_freq_table;
- info->set_freq = exynos5250_set_frequency;
-
- cpufreq = info;
-
- return 0;
-
-err_mout_apll:
- clk_put(mout_mpll);
-err_mout_mpll:
- clk_put(moutcore);
-err_moutcore:
- clk_put(cpu_clk);
-
- pr_err("%s: failed initialization\n", __func__);
- return -EINVAL;
-}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/