Re: [PATCH] power_supply: rt9455_charger: Properly notify userspace about charging events
From: Krzysztof Kozlowski
Date: Wed Jul 01 2015 - 20:49:57 EST
2015-06-18 1:28 GMT+09:00 Anda-Maria Nicolae <anda-maria.nicolae@xxxxxxxxx>:
> Do not call power_supply_changed() when CHRVPI interrupt has occurred.
What I cannot find here is the answer to: why? I am not familiar with
the driver so this is just guessing that you wanted to notify
userspace about connected/disconnected charger. In both cases (before
and after the patch) this is achieved, isn't it?
Best regards,
Krzysztof
> CHRVPI interrupt occurs when the charger is connected to or disconnected
> from the power source. Call power_supply_changed() after PWR_RDY bit is
> read, to distinguish between connection to or disconnection from the power
> source.
> Also, call power_supply_changed() after the battery is reconnected to the
> charger, to notify userspace that the battery is no longer absent.
>
> Signed-off-by: Anda-Maria Nicolae <anda-maria.nicolae@xxxxxxxxx>
> ---
> drivers/power/rt9455_charger.c | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/power/rt9455_charger.c b/drivers/power/rt9455_charger.c
> index 08baac6..a49a9d4 100644
> --- a/drivers/power/rt9455_charger.c
> +++ b/drivers/power/rt9455_charger.c
> @@ -973,7 +973,6 @@ static int rt9455_irq_handler_check_irq2_register(struct rt9455_info *info,
>
> if (irq2 & GET_MASK(F_CHRVPI)) {
> dev_dbg(dev, "Charger fault occurred\n");
> - alert_userspace = true;
> /*
> * CHRVPI bit is set in 2 cases:
> * 1. when the power source is connected to the charger.
> @@ -981,6 +980,9 @@ static int rt9455_irq_handler_check_irq2_register(struct rt9455_info *info,
> * To identify the case, PWR_RDY bit is checked. Because
> * PWR_RDY bit is set / cleared after CHRVPI interrupt is
> * triggered, it is used delayed_work to later read PWR_RDY bit.
> + * Also, do not set to true alert_userspace, because there is no
> + * need to notify userspace when CHRVPI interrupt has occurred.
> + * Userspace will be notified after PWR_RDY bit is read.
> */
> queue_delayed_work(system_power_efficient_wq,
> &info->pwr_rdy_work,
> @@ -1178,7 +1180,7 @@ static irqreturn_t rt9455_irq_handler_thread(int irq, void *data)
> /*
> * Sometimes, an interrupt occurs while rt9455_probe() function
> * is executing and power_supply_register() is not yet called.
> - * Do not call power_supply_charged() in this case.
> + * Do not call power_supply_changed() in this case.
> */
> if (info->charger)
> power_supply_changed(info->charger);
> @@ -1478,6 +1480,11 @@ static void rt9455_pwr_rdy_work_callback(struct work_struct *work)
> RT9455_MAX_CHARGING_TIME * HZ);
> break;
> }
> + /*
> + * Notify userspace that the charger has been either connected to or
> + * disconnected from the power source.
> + */
> + power_supply_changed(info->charger);
> }
>
> static void rt9455_max_charging_time_work_callback(struct work_struct *work)
> @@ -1533,6 +1540,11 @@ static void rt9455_batt_presence_work_callback(struct work_struct *work)
> if (ret)
> dev_err(dev, "Failed to unmask BATAB interrupt\n");
> }
> + /*
> + * Notify userspace that the battery is now connected to the
> + * charger.
> + */
> + power_supply_changed(info->charger);
> }
> }
>
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/