RE: [PATCH 1/2] usb: chipidea: Reduce ULPI PHY reset pulse to datasheet spec of 1us

[David Laight]

From: Peter Chen
> Sent: 30 June 2015 03:06
> On Fri, Jun 26, 2015 at 03:47:03PM +0200, Mike Looijmans wrote:
> > The datasheet for the 334x PHY mentions that a reset can be performed:
> > "... by bringing the pin low for a minimum of 1 microsecond and
> > then high."
> > A delay of 5ms to implement that seems overly long, so reduce it to
> > just 1us.
> > As for the delay after reset, the datasheet only mentioned that the
> > chip will assert the DIR output. 1ms seems like a safe time to wait
> > for that to happen, so no change there.
> >
> > Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
> > ---
> >  drivers/usb/chipidea/core.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> > index e970863..c865abe 100644
> > --- a/drivers/usb/chipidea/core.c
> > +++ b/drivers/usb/chipidea/core.c
> > @@ -664,7 +664,7 @@ static int ci_hdrc_create_ulpi_phy(struct device *dev, struct ci_hdrc *ci)
> >  			dev_err(dev, "Failed to request ULPI reset gpio: %d\n", ret);
> >  			return ret;
> >  		}
> > -		msleep(5);
> > +		udelay(1);

If the spec says 1us I'd delay for longer just to make sure.
And add a comment saying that the reset needs to be 1us long.

	David

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/