RE: [PATCH v2] arm: koelsch: make USB0 perform Host/Function switching

[Phil Edworthy]

Hi Sergei.

On 02 July 2015 12:32, Sergei wrote:
> Hello.
> 
> On 7/2/2015 11:14 AM, Phil Edworthy wrote:
> 
> > Both USB Host (pci0) and Function (USBHS) drivers are enabled.
> > The USB PHY driver determines which IP block should be connected
> > based on vbus and id signals read via gpios.
> 
> > Note that switch SW5 and SW6 on Koelsch board needs to be set to
> > position 3 for this to work.
> 
> [...]
> 
> > diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts
> b/arch/arm/boot/dts/r8a7791-koelsch.dts
> > index cffe33f..1bb34d0 100644
> > --- a/arch/arm/boot/dts/r8a7791-koelsch.dts
> > +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
> > @@ -615,7 +615,6 @@
> >
> >   &pci0 {
> >   	status = "okay";
> > -	pinctrl-0 = <&usb0_pins>;
> >   	pinctrl-names = "default";
> 
>     As you're removing "pinctrl-0" prop, you also should remove "pinctrl-names".
Ok.

> >   };
> >
> > @@ -627,13 +626,15 @@
> >
> >   &hsusb {
> >   	status = "okay";
> > -	pinctrl-0 = <&usb0_pins>;
> 
>     Likewise.
Sure.

> [...]
> 
> WBR, Sergei

Thanks
Phil
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/