[PATCH] libata: increase the timeout when setting transfer mode

[Mikulas Patocka]

I have a ST4000DM000 disk. If Linux is booted while the disk is spun down,
the command that sets transfer mode causes the disk to spin up. The
spin-up takes longer than the default 5s timeout, so the command fails and
timeout is reported.

Fix this by increasing the timeout to 15s, which is enough for the disk to
spin up.

Signed-off-by: Mikulas Patocka <mpatocka@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx

---
 drivers/ata/libata-core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Index: linux-4.1.1/drivers/ata/libata-core.c
===================================================================
--- linux-4.1.1.orig/drivers/ata/libata-core.c	2015-07-07 22:21:39.962112941 +0200
+++ linux-4.1.1/drivers/ata/libata-core.c	2015-07-08 18:59:03.852951057 +0200
@@ -4501,7 +4501,8 @@ static unsigned int ata_dev_set_xfermode
 	else /* In the ancient relic department - skip all of this */
 		return 0;
 
-	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
+	/* On some disks, this command causes spin-up, so we need longer timeout */
+	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 15000);
 
 	DPRINTK("EXIT, err_mask=%x\n", err_mask);
 	return err_mask;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/