[PATCH RFC V1 3/3] devicetree: da9062: Add device tree bindings for DA9062 RTC

From: S Twiss
Date: Thu Jul 09 2015 - 03:51:49 EST


From: S Twiss <stwiss.opensource@xxxxxxxxxxx>

Add device tree bindings for the DA9062 RTC driver component

Signed-off-by: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>

---
Checks performed with linux-next/next-20150708/scripts/checkpatch.pl
da9062.txt total: 0 errors, 0 warnings, 88 lines checked
This patch applies against linux-next and next-20150708


Documentation/devicetree/bindings/mfd/da9062.txt | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
index 5765ed9..38802b5 100644
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ b/Documentation/devicetree/bindings/mfd/da9062.txt
@@ -5,6 +5,7 @@ DA9062 consists of a large and varied group of sub-devices:
Device Supply Names Description
------ ------------ -----------
da9062-regulator : : LDOs & BUCKs
+da9062-rtc : : Real-Time Clock
da9062-watchdog : : Watchdog Timer

======
@@ -41,6 +42,10 @@ Sub-nodes:
Documentation/devicetree/bindings/regulator/regulator.txt


+- rtc : This node defines settings required for the Real-Time Clock associated
+ with the DA9062. There are currently no entries in this binding, however
+ compatible = "dlg,da9062-rtc" should be added if a node is created.
+
- watchdog: This node defines the settings for the watchdog driver associated
with the DA9062 PMIC. The compatible = "dlg,da9062-watchdog" should be added
if a node is created.
@@ -55,6 +60,10 @@ Example:
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;

+ rtc {
+ compatible = "dlg,da9062-rtc";
+ };
+
watchdog {
compatible = "dlg,da9062-watchdog";
};
--
end-of-patch for PATCH RFC V1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/