Re: [PATCH v2 5/7] ARM: dts: Exynos4x12: add CPU OPP and regulator supply property
From: Krzysztof Kozlowski
Date: Fri Jul 10 2015 - 04:35:54 EST
On 10.07.2015 00:43, Bartlomiej Zolnierkiewicz wrote:
> For Exynos4x12 platforms, add CPU operating points (using
> opp-v2 bindings) and CPU regulator supply properties for
> migrating from Exynos specific cpufreq driver to using
> generic cpufreq driver.
>
> Based on the earlier work by Thomas Abraham.
>
> Cc: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
> Cc: Doug Anderson <dianders@xxxxxxxxxxxx>
> Cc: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
> Cc: Andreas Faerber <afaerber@xxxxxxx>
> Cc: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/exynos4212.dtsi | 81 ++++++++++++++++++++++++
> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 4 ++
> arch/arm/boot/dts/exynos4412-origen.dts | 5 ++
> arch/arm/boot/dts/exynos4412-trats2.dts | 5 ++
> arch/arm/boot/dts/exynos4412.dtsi | 83 +++++++++++++++++++++++++
> 5 files changed, 178 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
> index d9c8efee..9dc40d5 100644
> --- a/arch/arm/boot/dts/exynos4212.dtsi
> +++ b/arch/arm/boot/dts/exynos4212.dtsi
> @@ -30,6 +30,9 @@
> device_type = "cpu";
> compatible = "arm,cortex-a9";
> reg = <0xA00>;
> + clocks = <&clock CLK_ARM_CLK>;
> + clock-names = "cpu";
> + operating-points-v2 = <&cpu0_opp_table>;
> cooling-min-level = <13>;
> cooling-max-level = <7>;
> #cooling-cells = <2>; /* min followed by max */
> @@ -39,6 +42,84 @@
> device_type = "cpu";
> compatible = "arm,cortex-a9";
> reg = <0xA01>;
> + operating-points-v2 = <&cpu0_opp_table>;
> + };
> + };
> +
> + cpu0_opp_table: opp_table0 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp00 {
> + opp-hz = <200000000>;
> + opp-microvolt = <900000>;
> + clock-latency-ns = <200000>;
> + };
> + opp01 {
> + opp-hz = <300000000>;
> + opp-microvolt = <900000>;
> + clock-latency-ns = <200000>;
> + };
> + opp02 {
> + opp-hz = <400000000>;
> + opp-microvolt = <925000>;
> + clock-latency-ns = <200000>;
> + };
> + opp03 {
> + opp-hz = <500000000>;
> + opp-microvolt = <950000>;
> + clock-latency-ns = <200000>;
> + };
> + opp04 {
> + opp-hz = <600000000>;
> + opp-microvolt = <975000>;
> + clock-latency-ns = <200000>;
> + };
> + opp05 {
> + opp-hz = <700000000>;
> + opp-microvolt = <987500>;
> + clock-latency-ns = <200000>;
> + };
> + opp06 {
> + opp-hz = <800000000>;
> + opp-microvolt = <1000000>;
> + clock-latency-ns = <200000>;
> + };
> + opp07 {
> + opp-hz = <900000000>;
> + opp-microvolt = <1037500>;
> + clock-latency-ns = <200000>;
> + };
> + opp08 {
> + opp-hz = <1000000000>;
> + opp-microvolt = <1087500>;
> + clock-latency-ns = <200000>;
> + };
> + opp09 {
> + opp-hz = <1100000000>;
> + opp-microvolt = <1137500>;
> + clock-latency-ns = <200000>;
> + };
> + opp10 {
> + opp-hz = <1200000000>;
> + opp-microvolt = <1187500>;
> + clock-latency-ns = <200000>;
> + };
> + opp11 {
> + opp-hz = <1300000000>;
> + opp-microvolt = <1250000>;
> + clock-latency-ns = <200000>;
> + };
> + opp12 {
> + opp-hz = <1400000000>;
> + opp-microvolt = <1287500>;
> + clock-latency-ns = <200000>;
> + };
> + opp13 {
> + opp-hz = <1500000000>;
> + opp-microvolt = <1350000>;
> + clock-latency-ns = <200000>;
> + turbo-mode;
> };
> };
> };
> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> index ca7d168..1c7811a 100644
> --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> @@ -507,3 +507,7 @@
> &watchdog {
> status = "okay";
> };
> +
> +&cpu0 {
> + cpu0-supply = <&buck2_reg>;
> +};
Can you put this in alphabetical order (before ehci node)?
> diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
> index 84c7631..21150b4 100644
> --- a/arch/arm/boot/dts/exynos4412-origen.dts
> +++ b/arch/arm/boot/dts/exynos4412-origen.dts
> @@ -532,3 +532,8 @@
> &watchdog {
> status = "okay";
> };
> +
> +
> +&cpu0 {
> + cpu0-supply = <&buck2_reg>;
> +};
Ditto
> diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
> index afc199d..1ee43456 100644
> --- a/arch/arm/boot/dts/exynos4412-trats2.dts
> +++ b/arch/arm/boot/dts/exynos4412-trats2.dts
> @@ -1313,3 +1313,8 @@
> vtmu-supply = <&ldo10_reg>;
> status = "okay";
> };
> +
> +
> +&cpu0 {
> + cpu0-supply = <&buck2_reg>;
> +};
The same.
Rest looks fine, so with the re-ordering:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Best regards,
Krzysztof
> diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
> index b78ada7..cead3a7 100644
> --- a/arch/arm/boot/dts/exynos4412.dtsi
> +++ b/arch/arm/boot/dts/exynos4412.dtsi
> @@ -30,6 +30,9 @@
> device_type = "cpu";
> compatible = "arm,cortex-a9";
> reg = <0xA00>;
> + clocks = <&clock CLK_ARM_CLK>;
> + clock-names = "cpu";
> + operating-points-v2 = <&cpu0_opp_table>;
> cooling-min-level = <13>;
> cooling-max-level = <7>;
> #cooling-cells = <2>; /* min followed by max */
> @@ -39,18 +42,98 @@
> device_type = "cpu";
> compatible = "arm,cortex-a9";
> reg = <0xA01>;
> + operating-points-v2 = <&cpu0_opp_table>;
> };
>
> cpu@A02 {
> device_type = "cpu";
> compatible = "arm,cortex-a9";
> reg = <0xA02>;
> + operating-points-v2 = <&cpu0_opp_table>;
> };
>
> cpu@A03 {
> device_type = "cpu";
> compatible = "arm,cortex-a9";
> reg = <0xA03>;
> + operating-points-v2 = <&cpu0_opp_table>;
> + };
> + };
> +
> + cpu0_opp_table: opp_table0 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp00 {
> + opp-hz = <200000000>;
> + opp-microvolt = <900000>;
> + clock-latency-ns = <200000>;
> + };
> + opp01 {
> + opp-hz = <300000000>;
> + opp-microvolt = <900000>;
> + clock-latency-ns = <200000>;
> + };
> + opp02 {
> + opp-hz = <400000000>;
> + opp-microvolt = <925000>;
> + clock-latency-ns = <200000>;
> + };
> + opp03 {
> + opp-hz = <500000000>;
> + opp-microvolt = <950000>;
> + clock-latency-ns = <200000>;
> + };
> + opp04 {
> + opp-hz = <600000000>;
> + opp-microvolt = <975000>;
> + clock-latency-ns = <200000>;
> + };
> + opp05 {
> + opp-hz = <700000000>;
> + opp-microvolt = <987500>;
> + clock-latency-ns = <200000>;
> + };
> + opp06 {
> + opp-hz = <800000000>;
> + opp-microvolt = <1000000>;
> + clock-latency-ns = <200000>;
> + };
> + opp07 {
> + opp-hz = <900000000>;
> + opp-microvolt = <1037500>;
> + clock-latency-ns = <200000>;
> + };
> + opp08 {
> + opp-hz = <1000000000>;
> + opp-microvolt = <1087500>;
> + clock-latency-ns = <200000>;
> + };
> + opp09 {
> + opp-hz = <1100000000>;
> + opp-microvolt = <1137500>;
> + clock-latency-ns = <200000>;
> + };
> + opp10 {
> + opp-hz = <1200000000>;
> + opp-microvolt = <1187500>;
> + clock-latency-ns = <200000>;
> + };
> + opp11 {
> + opp-hz = <1300000000>;
> + opp-microvolt = <1250000>;
> + clock-latency-ns = <200000>;
> + };
> + opp12 {
> + opp-hz = <1400000000>;
> + opp-microvolt = <1287500>;
> + clock-latency-ns = <200000>;
> + };
> + opp13 {
> + opp-hz = <1500000000>;
> + opp-microvolt = <1350000>;
> + clock-latency-ns = <200000>;
> + turbo-mode;
> };
> };
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/