Re: [PATCH v2 2/6] soc: Mediatek: Add SCPSYS CPU power domain driver

From: Scott Shu
Date: Mon Jul 13 2015 - 00:18:52 EST

Next message: Mike Kravetz: "[PATCH v3 01/10] mm/hugetlb: add cache of descriptors to resv_map for region_add"
Previous message: Stephen Rothwell: "linux-next: Tree for Jul 13"
In reply to: Matthias Brugger: "Re: [PATCH v2 2/6] soc: Mediatek: Add SCPSYS CPU power domain driver"
Next in thread: Scott Shu: "[PATCH v2 6/6] ARM: dts: mt6580: enable basic SMP bringup for MT6580"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

For some platform, the code for controlling CPU power is located in
arch/arm/mach-xxxx. (i.e., mach-hisi and mach-qcom). The framework is
clear and easy to maintain. In addition, the code will be called in
very early stage during system boot up.Is the platform driver ready for
the moment?

On Fri, 2015-07-10 at 16:31 +0200, Matthias Brugger wrote:
> On Friday, July 10, 2015 02:04:05 PM Scott Shu wrote:
> > This adds a CPU power domain driver for the Mediatek SCPSYS unit on
> > MT6580.
> >
> > Signed-off-by: Scott Shu <scott.shu@xxxxxxxxxxxx>
> > ---
> > arch/arm/mach-mediatek/Makefile | 2 +-
> > arch/arm/mach-mediatek/generic.h | 23 ++++
> > arch/arm/mach-mediatek/hotplug.c | 267
> > +++++++++++++++++++++++++++++++++++++++ 3 files changed, 291 insertions(+),
> > 1 deletion(-)
> > create mode 100644 arch/arm/mach-mediatek/generic.h
> > create mode 100644 arch/arm/mach-mediatek/hotplug.c
> >
> > diff --git a/arch/arm/mach-mediatek/Makefile
> > b/arch/arm/mach-mediatek/Makefile index 2116460..b2e4ef5 100644
> > --- a/arch/arm/mach-mediatek/Makefile
> > +++ b/arch/arm/mach-mediatek/Makefile
> > @@ -1,4 +1,4 @@
> > ifeq ($(CONFIG_SMP),y)
> > -obj-$(CONFIG_ARCH_MEDIATEK) += platsmp.o
> > +obj-$(CONFIG_ARCH_MEDIATEK) += platsmp.o hotplug.o
> > endif
> > obj-$(CONFIG_ARCH_MEDIATEK) += mediatek.o
> > diff --git a/arch/arm/mach-mediatek/generic.h
> > b/arch/arm/mach-mediatek/generic.h new file mode 100644
> > index 0000000..376f183
> > --- /dev/null
> > +++ b/arch/arm/mach-mediatek/generic.h
> > @@ -0,0 +1,23 @@
> > +/*
> > + * Copyright (c) 2015 Mediatek Inc.
> > + * Author: Scott Shu <scott.shu@xxxxxxxxxxxx>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +#ifndef __MACH_GENERIC_H
> > +#define __MACH_GENERIC_H
> > +
> > +#include <linux/kernel.h>
> > +
> > +int spm_cpu_mtcmos_init(void);
> > +int spm_cpu_mtcmos_on(int cpu);
> > +int spm_cpu_mtcmos_off(int cpu, bool wfi);
> > +
> > +#endif
> > diff --git a/arch/arm/mach-mediatek/hotplug.c
> > b/arch/arm/mach-mediatek/hotplug.c new file mode 100644
> > index 0000000..bd97f2e
> > --- /dev/null
> > +++ b/arch/arm/mach-mediatek/hotplug.c
> > @@ -0,0 +1,267 @@
> > +/*
> > + * Copyright (c) 2015 Mediatek Inc.
> > + * Author: Scott Shu <scott.shu@xxxxxxxxxxxx>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +#include <linux/init.h>
> > +#include <linux/module.h>
> > +#include <linux/kernel.h>
> > +#include <linux/spinlock.h>
> > +#include <linux/delay.h>
> > +#include <linux/of.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/of_address.h>
> > +
> > +/* SCPSYS registers */
> > +#define SPM_POWERON_CONFIG_SET 0x0000
> > +
> > +#define SPM_CA7_CPU0_PWR_CON 0x0200
> > +#define SPM_CA7_CPU1_PWR_CON 0x0218
> > +#define SPM_CA7_CPU2_PWR_CON 0x021c
> > +#define SPM_CA7_CPU3_PWR_CON 0x0220
> > +
> > +#define SPM_CA7_CPU0_L1_PDN 0x025c
> > +#define SPM_CA7_CPU1_L1_PDN 0x0264
> > +#define SPM_CA7_CPU2_L1_PDN 0x026c
> > +#define SPM_CA7_CPU3_L1_PDN 0x0274
> > +
> > +#define SPM_PWR_STATUS 0x060c
> > +#define SPM_PWR_STATUS_2ND 0x0610
> > +#define SPM_SLEEP_TIMER_STA 0x0720
> > +
> > +/* bit definition in SPM_CA7_CPUx_PWR_CON */
> > +#define SRAM_ISOINT_B BIT(6)
> > +#define SRAM_CKISO BIT(5)
> > +#define PWR_CLK_DIS BIT(4)
> > +#define PWR_ON_2ND BIT(3)
> > +#define PWR_ON BIT(2)
> > +#define PWR_ISO BIT(1)
> > +#define PWR_RST_B BIT(0)
> > +
> > +/* bit definition in SPM_CA7_CPUx_L1_PDN */
> > +#define L1_PDN_ACK BIT(8)
> > +#define L1_PDN BIT(0)
> > +
> > +#define MT6580_MAX_CPUS 4
> > +
> > +static DEFINE_SPINLOCK(spm_cpu_lock);
> > +
> > +void __iomem *spm_cpu_base;
> > +
> > +u32 spm_cpu_pwr_con[MT6580_MAX_CPUS] = {
> > + SPM_CA7_CPU0_PWR_CON,
> > + SPM_CA7_CPU1_PWR_CON,
> > + SPM_CA7_CPU2_PWR_CON,
> > + SPM_CA7_CPU3_PWR_CON,
> > +};
> > +
> > +u32 spm_cpu_l1_pdn[MT6580_MAX_CPUS] = {
> > + SPM_CA7_CPU0_L1_PDN,
> > + SPM_CA7_CPU1_L1_PDN,
> > + SPM_CA7_CPU2_L1_PDN,
> > + SPM_CA7_CPU3_L1_PDN,
> > +};
> > +
> > +#define SPM_REGWR_EN BIT(0)
> > +#define SPM_PROJECT_CODE 0x0B16
> > +
> > +int spm_cpu_mtcmos_on(int cpu)
> > +{
> > + unsigned long flags;
> > + static u32 spmcpu_pwr_con, spmcpu_l1_pdn;
> > + unsigned int temp;
> > + int timeout = 10;
> > + int ret = -ENOSYS;
> > +
> > + temp = (SPM_PROJECT_CODE << 16) | SPM_REGWR_EN;
> > + writel_relaxed(temp, spm_cpu_base + SPM_POWERON_CONFIG_SET);
> > +
> > + spmcpu_pwr_con = spm_cpu_pwr_con[cpu];
> > + spmcpu_l1_pdn = spm_cpu_l1_pdn[cpu];
> > +
> > + spin_lock_irqsave(&spm_cpu_lock, flags);
> > +
> > + /* Set PWR_ON */
> > + temp = readl_relaxed(spm_cpu_base + spmcpu_pwr_con);
> > + temp |= PWR_ON;
> > + writel_relaxed(temp, spm_cpu_base + spmcpu_pwr_con);
> > +
> > + /* Wait for charging core power */
> > + udelay(1);
> > +
> > + /* Set PWR_ON_2ND */
> > + temp = readl_relaxed(spm_cpu_base + spmcpu_pwr_con);
> > + temp |= PWR_ON_2ND;
> > + writel_relaxed(temp, spm_cpu_base + spmcpu_pwr_con);
> > +
> > + /* Wait for the power-ack */
> > + while (((readl_relaxed(spm_cpu_base + SPM_PWR_STATUS) &
> > + (1U << (13 - cpu))) != (1U << (13 - cpu))) ||
> > + ((readl_relaxed(spm_cpu_base + SPM_PWR_STATUS_2ND) &
> > + (1U << (13 - cpu))) != (1U << (13 - cpu)))) {
> > + if (--timeout == 0)
> > + goto fail;
> > + udelay(1);
> > + }
> > +
> > + temp = readl_relaxed(spm_cpu_base + spmcpu_pwr_con);
> > + temp &= ~PWR_ISO;
> > + writel_relaxed(temp, spm_cpu_base + spmcpu_pwr_con);
> > +
> > + /* L1 power on */
> > + temp = readl_relaxed(spm_cpu_base + spmcpu_l1_pdn);
> > + temp &= ~L1_PDN;
> > + writel_relaxed(temp, spm_cpu_base + spmcpu_l1_pdn);
> > + timeout = 10;
> > + while ((readl_relaxed(spm_cpu_base + spmcpu_l1_pdn) &
> > + L1_PDN_ACK) != 0) {
> > + if (--timeout == 0)
> > + goto fail;
> > + udelay(1);
> > + }
> > +
> > + /* Wait for memory power ready */
> > + udelay(1);
> > +
> > + /* Set SRAM_ISOINT_B */
> > + temp = readl_relaxed(spm_cpu_base + spmcpu_pwr_con);
> > + temp |= SRAM_ISOINT_B;
> > + writel_relaxed(temp, spm_cpu_base + spmcpu_pwr_con);
> > +
> > + /* Clear SRAM_CKISO */
> > + temp = readl_relaxed(spm_cpu_base + spmcpu_pwr_con);
> > + temp &= ~SRAM_CKISO;
> > + writel_relaxed(temp, spm_cpu_base + spmcpu_pwr_con);
> > +
> > + /* Clear PWR_CLK_DIS */
> > + temp = readl_relaxed(spm_cpu_base + spmcpu_pwr_con);
> > + temp &= ~PWR_CLK_DIS;
> > + writel_relaxed(temp, spm_cpu_base + spmcpu_pwr_con);
> > +
> > + /* Set PWR_RST_B to finish power on and reset sequences */
> > + temp = readl_relaxed(spm_cpu_base + spmcpu_pwr_con);
> > + temp |= PWR_RST_B;
> > + writel_relaxed(temp, spm_cpu_base + spmcpu_pwr_con);
> > +
> > + ret = 0;
> > +fail:
> > + spin_unlock_irqrestore(&spm_cpu_lock, flags);
> > +
> > + return ret;
> > +}
> > +
> > +int spm_cpu_mtcmos_off(int cpu, bool wfi)
> > +{
> > + unsigned long flags;
> > + static u32 spmcpu_pwr_con, spmcpu_l1_pdn;
> > + unsigned int temp;
> > + int timeout = 10;
> > + int ret = -ENOSYS;
> > +
> > + temp = (SPM_PROJECT_CODE << 16) | SPM_REGWR_EN;
> > + writel_relaxed(temp, spm_cpu_base + SPM_POWERON_CONFIG_SET);
> > +
> > + spmcpu_pwr_con = spm_cpu_pwr_con[cpu];
> > + spmcpu_l1_pdn = spm_cpu_l1_pdn[cpu];
> > +
> > + if (wfi) {
> > + while ((readl_relaxed(spm_cpu_base + SPM_SLEEP_TIMER_STA) &
> > + (1U << (16 + cpu))) == 0) {
> > + if (--timeout == 0)
> > + return ret;
> > + udelay(1);
> > + }
> > + }
> > +
> > + spin_lock_irqsave(&spm_cpu_lock, flags);
> > +
> > + /* Set PWR_ISO */
> > + temp = readl_relaxed(spm_cpu_base + spmcpu_pwr_con);
> > + temp |= PWR_ISO;
> > + writel_relaxed(temp, spm_cpu_base + spmcpu_pwr_con);
> > +
> > + /* Set SRAM_CKISO */
> > + temp = readl_relaxed(spm_cpu_base + spmcpu_pwr_con);
> > + temp |= SRAM_CKISO;
> > + writel_relaxed(temp, spm_cpu_base + spmcpu_pwr_con);
> > +
> > + /* Clear SRAM_ISOINT_B */
> > + temp = readl_relaxed(spm_cpu_base + spmcpu_pwr_con);
> > + temp &= ~SRAM_ISOINT_B;
> > + writel_relaxed(temp, spm_cpu_base + spmcpu_pwr_con);
> > +
> > + /* L1 power off */
> > + temp = readl_relaxed(spm_cpu_base + spmcpu_l1_pdn);
> > + temp |= L1_PDN;
> > + writel_relaxed(temp, spm_cpu_base + spmcpu_l1_pdn);
> > + timeout = 10;
> > + while ((readl_relaxed(spm_cpu_base + spmcpu_l1_pdn) &
> > + L1_PDN_ACK) != L1_PDN_ACK) {
> > + if (--timeout == 0)
> > + goto fail;
> > + udelay(1);
> > + }
> > +
> > + /* Clear PWR_RST_B */
> > + temp = readl_relaxed(spm_cpu_base + spmcpu_pwr_con);
> > + temp &= ~PWR_RST_B;
> > + writel_relaxed(temp, spm_cpu_base + spmcpu_pwr_con);
> > +
> > + /* Set PWR_CLK_DIS */
> > + temp = readl_relaxed(spm_cpu_base + spmcpu_pwr_con);
> > + temp |= PWR_CLK_DIS;
> > + writel_relaxed(temp, spm_cpu_base + spmcpu_pwr_con);
> > +
> > + /* Clear PWR_ON */
> > + temp = readl_relaxed(spm_cpu_base + spmcpu_pwr_con);
> > + temp &= ~PWR_ON;
> > + writel_relaxed(temp, spm_cpu_base + spmcpu_pwr_con);
> > +
> > + /* Clear PWR_ON_2ND */
> > + temp = readl_relaxed(spm_cpu_base + spmcpu_pwr_con);
> > + temp &= ~PWR_ON_2ND;
> > + writel_relaxed(temp, spm_cpu_base + spmcpu_pwr_con);
> > +
> > + timeout = 10;
> > + while (((readl_relaxed(spm_cpu_base + SPM_PWR_STATUS) &
> > + (1U << (13 - cpu))) != 0) ||
> > + ((readl_relaxed(spm_cpu_base + SPM_PWR_STATUS_2ND) &
> > + (1U << (13 - cpu))) != 0)) {
> > + if (--timeout == 0)
> > + goto fail;
> > + udelay(1);
> > + }
> > +
> > + ret = 0;
> > +fail:
> > + spin_unlock_irqrestore(&spm_cpu_lock, flags);
> > +
> > + return ret;
> > +}
> > +
> > +int spm_cpu_mtcmos_init(void)
> > +{
> > + struct device_node *node;
> > +
> > + node = of_find_compatible_node(NULL, NULL, "mediatek,mt6580-scpsys");
>
> This looks pretty much as if it should go in
> drivers/soc/mediatek/mtk-scpsys.c
>
> AFAIR Sascha already mentioned that in v1.
> Why do you want/need to implement this mach-mediatek?
>
> Thanks,
> Matthias

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Mike Kravetz: "[PATCH v3 01/10] mm/hugetlb: add cache of descriptors to resv_map for region_add"
Previous message: Stephen Rothwell: "linux-next: Tree for Jul 13"
In reply to: Matthias Brugger: "Re: [PATCH v2 2/6] soc: Mediatek: Add SCPSYS CPU power domain driver"
Next in thread: Scott Shu: "[PATCH v2 6/6] ARM: dts: mt6580: enable basic SMP bringup for MT6580"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]