RE: [PATCH v3] phy: rcar-gen2 usb: Add Host/Function switching for USB0

[Phil Edworthy]

Hi Sergei,

On 10 July 2015 17:36, Sergei wrote:
> Hello.
> 
> On 07/07/2015 02:55 PM, Phil Edworthy wrote:
> 
> > Instead of statically selecting the PHY connection to either the
> > USBHS (Function) or PCI0 (Host) IP blocks, this change allows the
> > dts to specifiy gpio pins for the vbus and id signals. Additional
> 
>     These GPIOs don't have anything to do with the PHY, they're interfacing
> Maxim MAX3355 OTG chip for which I have submitted the extcon driver.
Hmm, I see what you mean... could you post your latest version of that
driver as it seems to have stalled 6 months ago?
 

> > gpio pins are used to control power to an external OTG device and
> > an override to turn vbus on/off.
> 
> > Note: the R-Car USB PHY only allows this Host/Function switching
> > on channel 0.
> 
> > This has been tested on a r8a7791 based Koelsch board, which uses
> > a MAX3355 device to supply vbus power when needed.
> 
> > Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
> 
>     I'm inclined to NAK this. You're modifying the wrong driver, I think.
> 
> WBR, Sergei

Thanks
Phil
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/