Re: [PATCH v2 2/4] ARM: dts: vf500-colibri: Add device tree node for touchscreen support

[Shawn Guo]

On Thu, Jul 16, 2015 at 08:43:20PM +0530, Sanchayan Maity wrote:
> Add device tree node for touchscreen support on Colibri VF50. The
> touchscreen functionality on VF50 uses the ADC channels of Vybrid
> and some GPIOs. Also add pinctrl nodes for proper pinmux.
> 
> Signed-off-by: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/vf500-colibri-eval-v3.dts |  4 +++
>  arch/arm/boot/dts/vf500-colibri.dtsi        | 46 +++++++++++++++++++++++++++++
>  2 files changed, 50 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
> index 7fc782c..c5efb57 100644
> --- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
> +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
> @@ -15,3 +15,7 @@
>  	model = "Toradex Colibri VF50 on Colibri Evaluation Board";
>  	compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500";
>  };
> +
> +&touchctrl {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi
> index cee34a3..7cbe341 100644
> --- a/arch/arm/boot/dts/vf500-colibri.dtsi
> +++ b/arch/arm/boot/dts/vf500-colibri.dtsi
> @@ -17,4 +17,50 @@
>  	memory {
>  		reg = <0x80000000 0x8000000>;
>  	};
> +
> +	touchctrl: vf50_touchctrl {

Minus rather than underscore should be used in node name.  And node name
should be generic.  "touchscreen" might be a good choice.

Shawn

> +		compatible = "toradex,vf50-touchctrl";
> +		io-channels = <&adc1 0>,<&adc0 0>,
> +				<&adc0 1>,<&adc1 2>;
> +		xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
> +		xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
> +		yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
> +		ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
> +		pen-detect-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
> +		pen-pullup-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "idle","default","gpios";
> +		pinctrl-0 = <&pinctrl_touchctrl_idle>;
> +		pinctrl-1 = <&pinctrl_touchctrl_default>;
> +		pinctrl-2 = <&pinctrl_touchctrl_gpios>;
> +		status = "disabled";
> +	};
> +};
> +
> +&iomuxc {
> +	vf610-colibri {
> +		pinctrl_touchctrl_idle: touchctrl_idle {
> +			fsl,pins = <
> +				VF610_PAD_PTA18__GPIO_8		0x206d
> +				VF610_PAD_PTA19__GPIO_9		0x206d
> +				>;
> +		};
> +
> +		pinctrl_touchctrl_default: touchctrl_default {
> +			fsl,pins = <
> +				VF610_PAD_PTA18__ADC0_SE0	0x2060
> +				VF610_PAD_PTA19__ADC0_SE1	0x2060
> +				VF610_PAD_PTA16__ADC1_SE0	0x2060
> +				VF610_PAD_PTB2__ADC1_SE2	0x2060
> +				>;
> +		};
> +
> +		pinctrl_touchctrl_gpios: touchctrl_gpios {
> +			fsl,pins = <
> +				VF610_PAD_PTA23__GPIO_13	0x22e9
> +				VF610_PAD_PTB23__GPIO_93	0x22e9
> +				VF610_PAD_PTA22__GPIO_12	0x22e9
> +				VF610_PAD_PTA11__GPIO_4		0x22e9
> +				>;
> +		};
> +	};
>  };
> -- 
> 2.4.6
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/