Re: [PATCH] Bluetooth: btusb: Recognize Realtek shared wifi/bluetooth devices

[Sjoerd Simons]

On Thu, 2015-07-30 at 13:45 +0200, Marcel Holtmann wrote:
> Hi Sjoerd,
> 
> > Recognize Realtek devices which share wifi and bluetooth such as 
> > the
> > rtl8723AU by vendor and interface.
> > 
> > T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
> > D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
> > P:  Vendor=0bda ProdID=0724 Rev= 2.00
> > S:  Manufacturer=Realtek
> > S:  Product=802.11n WLAN Adapter
> > S:  SerialNumber=00e04c000001
> > C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
> > A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
> > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> > E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> > E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> > I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> > E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> > I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> > E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> > I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> > E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> > I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> > E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> > I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> > E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> > I:* If#= 2 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff 
> > Driver=rtl8723au
> > E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=500us
> > 
> > Signed-off-by: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
> > ---
> > drivers/bluetooth/btusb.c | 4 ++++
> > 1 file changed, 4 insertions(+)
> > 
> > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> > index 93339a4..3324c91 100644
> > --- a/drivers/bluetooth/btusb.c
> > +++ b/drivers/bluetooth/btusb.c
> > @@ -149,6 +149,10 @@ static const struct usb_device_id 
> > btusb_table[] = {
> > 	{ USB_DEVICE(0x8087, 0x0a5a),
> > 	  .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
> > 
> > +	/* Realtek devices sharing Bluetooth and Wifi*/
> > +	{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
> > +	  .driver_info = BTUSB_REALTEK },
> > +
> 
> is this still needed after I applied the generic USB_INTERFACE_INFO 
> patch?

Noe as Daniel Drake mentioned in his submission, this patch is obsolete
now that the USB_INTERFACE_INFO change has landed.


-- 
Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
Collabora Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/